- HOME
- POLYMER SEARCH
- Thermoplastic
- Fluoropolymer
- PTFE
- Polytetrafluoroethylene (PTFE), Molded
- Solvay Specialty Polymers Algoflon® F 7 Polytetrafluoroethylene (PTFE)
Solvay Specialty Polymers Algoflon® F 7 Polytetrafluoroethylene (PTFE)
| Category | Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Molded |
| Manufacturer | Solvay Specialty Polymers |
| Trade Name | Algoflon® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Solvay Specialty Polymers Algoflon® F 7 Polytetrafluoroethylene (PTFE).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Algoflon® F 7 is a fine cut homopolymer PTFE powder that is white, granular and non-free flowing. It is designed for normal compression molding and in particular molding of large billets for low thickness skived tapes down to 1 mil (25 µm).Features: Good Chemical ResistanceUses: Additive; BlendingInformation provided by Solvay Specialty Polymers.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 2.17 g/cc | 0.0784 lb/in³ | ASTM D792 |
| Apparent Bulk Density | 0.410 g/cc | 0.0148 lb/in³ | ASTM D4894 |
| Water Absorption | 0.00 % | 0.00 % | ASTM D570 |
| Particle Size | 15 µm | 15 µm | Internal Method |
| Linear Mold Shrinkage | 0.030 cm/cm | 0.030 in/in | Radial shrinkage of 10 cm o.d. sintered rod at 23°C |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Ultimate | 44.0 MPa | 6380 psi | ASTM D638 |
| Elongation at Break | 400 % | 400 % | ASTM D638 |
| Coefficient of Friction, Dynamic | 0.060 | 0.060 | ASTM D1894 |
| Coefficient of Friction, Static | 0.080 | 0.080 | ASTM D1894 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Thermal Conductivity | 0.240 W/m-K | 1.67 BTU-in/hr-ft²-°F | ASTM C177 |
| Maximum Service Temperature, Air | 260 °C | 500 °F | Continuous Service |
| Flammability, UL94 | V-0 | V-0 | VE-0 |
| Oxygen Index | >= 95 % | >= 95 % | ASTM D2863 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 1.00e+18 ohm-cm | 1.00e+18 ohm-cm | ASTM D257 |
| Dielectric Constant | 2.1 @Frequency 60.0 - 2.00e+9 Hz |
2.1 @Frequency 60.0 - 2.00e+9 Hz |
ASTM D150 |
| Dielectric Strength | 75.0 kV/mm | 1910 kV/in | ASTM D149 |
| 85.0 kV/mm | 2160 kV/in | ASTM D149 | |
| Dissipation Factor | >= 0.00030 @Frequency 60.0 - 2.00e+9 Hz |
>= 0.00030 @Frequency 60.0 - 2.00e+9 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| FDA | Yes | Yes |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Agency Ratings | FDA 21 CFR 177.1550 | |
| Availability | Asia Pacific; Europe | |
| Color | White | |
| Form | Powder | |
| Processing Technique | Compression Molding |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved