- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Saint-Gobain COHRlastic® CF3320 Reinforced Solid Rubber
Saint-Gobain COHRlastic® CF3320 Reinforced Solid Rubber
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Saint-Gobain Perfomance Plastics |
| Trade Name | COHRlastic® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Saint-Gobain COHRlastic® CF3320 Reinforced Solid Rubber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: COHRlastic® CF silicone solid rubber reinforced with fiberglass is a dimensionally-stable, durable material for press pads, belting and gasketing. It is available in six constructions. CF 3320, available in three thicknesses, was developed to meet AMS 3320. Consequently, 3320 has lubricating oil resistance and excellent compression set resistance. All data based on a 0.0625 inch test sample.(Also available in 3/32, 1/8; Thickness shown is for silicone rubber. Fiberglass thickness = 0.014".) Information provided by Saint Gobain Performance Products.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Volatile Organic Compounds (VOC) Content | 1.5 g/l | 1.5 g/l | Weight Loss (4 hrs at 400°F) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 74 | 74 | |
| Elongation at Break | <= 10 % | <= 10 % | |
| Flexural Strength | 5.17 MPa | 750 psi | Diaphragm Burst Strength |
| Tear Strength | 52.6 kN/m | 300 pli |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 270 µm/m-°C @Temperature 20.0 °C |
150 µin/in-°F @Temperature 68.0 °F |
Silicone rubber component |
| Thermal Conductivity | 0.274 W/m-K | 1.90 BTU-in/hr-ft²-°F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 19.7 kV/mm | 500 kV/in |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Red |
Users viewing this material also viewed the following:
- Overview of materials for Polystyrene, Wood Filled
- SMAC SMACDISK® 1114S Damping Material
- SABIC Innovative Plastics LNP THERMOCOMP RX10408H PA 66
- Shandong Guangyin PA 612 Nylon Resin
- UBE UBEPOL VCR412 Synthetic Rubber Vulcanizate (Cured 50 Minutes at 145°C)
- DuPont Elvanol® 70-20 Polyvinyl Alcohol Fully Hydrolyzed General Purpose Grade
- DSM Stanyl® TE200F6 Nylon 46-30% Glass Reinforced (European Grade) (Dry)
- DSM Stanyl® TW200F8 Nylon 46-40% Glass Reinforced (European Grade) (Dry)
- Abatron AboWeld 8708-8 One-Component Structural/Dielectric Epoxy
- Schmolz + Bickenbach Cryodur® 2510 (O-1) Cold Work Die Steel
Copyright © lookpolymers.com All Rights Reserved