Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

SABIC Innovative Plastics ULTEM 4000 PEI (Europe-Africa-Middle East)

Category Polymer , Thermoplastic , Polyetherimide (PEI)
Manufacturer SABIC Innovative Plastics (GE Plastics)
Trade Name ULTEM
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF SABIC Innovative Plastics ULTEM 4000 PEI (Europe-Africa-Middle East).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Glass fiber, PTFE, and Graphite filled, standard flow Polyetherimide (Tg 217C). Resin is RoHS compliant. UL94 V0 listing.
Physical Properties Metric English Comments
Density 1.68 g/cc
0.0607 lb/in³
ISO 1183
Moisture Absorption 0.300 %
0.300 %
23°C / 50% RH; ISO 62
Water Absorption at Saturation 0.70 %
0.70 %
ISO 62
Linear Mold Shrinkage, Flow 0.0010 - 0.0030 cm/cm
0.0010 - 0.0030 in/in
on Tensile Bar; SABIC Method
Melt Index of Compound 5.0 g/10 min

@Load 5.00 kg,
Temperature 360 °C
 5.0 g/10 min

@Load 11.0 lb,
Temperature 680 °F
 MVR [cm^3/10 min]; ISO 1133
Mechanical Properties Metric English Comments
Hardness, H358/30 140 MPa
20300 psi
ISO 2039-1
Tensile Strength at Break 90.0 MPa
13100 psi
5 mm/min; ISO 527
Elongation at Break 1.0 %
1.0 %
5 mm/min; ISO 527
Tensile Modulus 9.90 GPa
1440 ksi
1 mm/min; ISO 527
Flexural Strength 120 MPa
17400 psi
2 mm/min; ISO 178
Flexural Modulus 7.00 GPa
1020 ksi
2 mm/min; ISO 178
Izod Impact, Unnotched (ISO) 15.0 kJ/m²
7.14 ft-lb/in²
80*10*4; ISO 180/1U
15.0 kJ/m²

@Temperature -30.0 °C
 7.14 ft-lb/in²

@Temperature -22.0 °F
 80*10*4; ISO 180/1U
Charpy Impact, Notched 0.800 J/cm²
3.81 ft-lb/in²
ISO 179/2C
0.800 J/cm²

@Temperature -30.0 °C
 3.81 ft-lb/in²

@Temperature -22.0 °F
 ISO 179/2C
K (wear) Factor 24.2 x 10-8 mm³/N-M
12.0 x 10-10 in³-min/ft-lb-hr
PV=2000 psi-fpm vs Self; SABIC Method
765 x 10-8 mm³/N-M
380 x 10-10 in³-min/ft-lb-hr
PV=2000 psi-fpm vs Self; SABIC Method
Limiting Pressure Velocity 2.30 MPa-m/sec
65700 psi-ft/min
0.51 m/s; SABIC Method
Taber Abrasion, mg/1000 Cycles 30
30
CS-17, 1 kg; SABIC Method
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 15.0 µm/m-°C

@Temperature 23.0 - 150 °C
 8.33 µin/in-°F

@Temperature 73.4 - 302 °F
 ISO 11359-2
CTE, linear, Transverse to Flow 50.0 µm/m-°C

@Temperature 23.0 - 150 °C
 27.8 µin/in-°F

@Temperature 73.4 - 302 °F
 ISO 11359-2
Thermal Conductivity 0.430 W/m-K
2.98 BTU-in/hr-ft²-°F
ISO 8302
Deflection Temperature at 0.46 MPa (66 psi) 210 °C
410 °F
Edgew 120*10*4 sp=100mm; ISO 75/Be
Deflection Temperature at 1.8 MPa (264 psi) 205 °C
401 °F
Edgew 120*10*4 sp=100mm; ISO 75/Ae
Vicat Softening Point 215 °C
419 °F
Rate B/50; ISO 306
220 °C
428 °F
Rate B/120; ISO 306
225 °C
437 °F
Rate A/50; ISO 306
Glass Transition Temp, Tg 217 °C
423 °F
UL RTI, Electrical 105 °C
221 °F
UL 746B
UL RTI, Mechanical with Impact 105 °C
221 °F
UL 746B
UL RTI, Mechanical without Impact 105 °C
221 °F
UL 746B
Flammability, UL94 V-0

@Thickness 0.840 mm
 V-0

@Thickness 0.0331 in
 UL 94
Oxygen Index 48 %
48 %
ISO 4589
Glow Wire Test 960 °C

@Thickness 3.20 mm
 1760 °F

@Thickness 0.126 in
 IEC 60695-2-12
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+15 ohm-cm
1.00e+15 ohm-cm
IEC 60093
Surface Resistance >= 1.00e+15 ohm
>= 1.00e+15 ohm
ROA; IEC 60093
Dielectric Constant 6.2

@Frequency 1.00e+6 Hz
 6.2

@Frequency 1.00e+6 Hz
 IEC 60250
6.8

@Frequency 50.0 - 60.0 Hz
 6.8

@Frequency 50.0 - 60.0 Hz
 IEC 60250
Dissipation Factor 0.013

@Frequency 50.0 - 60.0 Hz
 0.013

@Frequency 50.0 - 60.0 Hz
 IEC 60250
0.022

@Frequency 1.00e+6 Hz
 0.022

@Frequency 1.00e+6 Hz
 IEC 60250
Comparative Tracking Index >= 100 V
>= 100 V
IEC 60112
200 V
200 V
IEC 60112
Descriptive Properties Value Comments
Ball Pressure Test, 125°C +/- 2°C PASSES
IEC 60695-10-2
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved