Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

SABIC 118 Series Linear Low Density Polyethylene for Blown Film

Category Polymer , Film , Thermoplastic , Polyethylene (PE) , LLDPE , Linear Low Density Polyethylene (LLDPE), Film Grade
Manufacturer SABIC
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF SABIC 118 Series Linear Low Density Polyethylene for Blown Film.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Product Description: 118 series resins are Linear Low Density Polyethylene grades suitable for general purpose packaging. Films produced using these resins yield good tensile properties, impact strength and optical properties.118N: No Slip & No Antiblock118L: 1000 ppm Slip & 2500 ppm Antiblock118Z: 1000 ppm Slip & 3500 ppm Antiblock118W: 1500 ppm Slip & 3500 ppm Antiblock118WS: 1400 ppm Slip & 2700 ppm Antiblock, High Clarity Grade118WJ: 1500 ppm Slip & 3500 ppm Antiblock, TNPP Free GradeTypical Applications: Lamination film, ice & frozen food bags, liners, garbage bags, coextruded films, consumer packaging, etc.Information provided by SABIC.
Physical Properties Metric English Comments
Density 0.918 g/cc
0.0332 lb/in³
load density; ASTM D1505
Thickness 30.0 microns
1.18 mil
Melt Flow 1.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
1.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
Mechanical Properties Metric English Comments
Film Tensile Strength at Yield, MD 10.0 MPa
1450 psi
ASTM D882
Film Tensile Strength at Yield, TD 9.00 MPa
1310 psi
ASTM D882
Film Elongation at Break, MD 650 %
650 %
ASTM D882
Film Elongation at Break, TD 830 %
830 %
ASTM D882
Elmendorf Tear Strength MD 160 g
160 g
ASTM D1922
Elmendorf Tear Strength TD 360 g
360 g
ASTM D1922
Elmendorf Tear Strength, MD 5.33 g/micron
135 g/mil
ASTM D1922
Elmendorf Tear Strength, TD 12.0 g/micron
305 g/mil
ASTM D1922
Dart Drop Total Energy 680 J/cm
1.27 ft-lb/mil
Puncture Resistance; SABIC Method
Dart Drop 3.50 g/micron
88.9 g/mil
ASTM D1709
Dart Drop Test 105 g
0.232 lb
ASTM D1709
Film Tensile Strength at Break, MD 37.0 MPa
5370 psi
ASTM D882
Film Tensile Strength at Break, TD 30.0 MPa
4350 psi
ASTM D882
1% Secant Modulus, MD 250 MPa
36300 psi
ASTM D882
1% Secant Modulus, TD 270 MPa
39200 psi
ASTM D882
Thermal Properties Metric English Comments
Vicat Softening Point 100 °C
212 °F
ASTM D1525
Optical Properties Metric English Comments
Haze 11 %
11 %
ASTM D1003
Gloss 87 %
87 %
at 45°; ASTM D2457
Processing Properties Metric English Comments
Melt Temperature 195 - 215 °C
383 - 419 °F
Blow-up Ratio (BUR) 2.0 - 3.0
2.0 - 3.0
Copyright © lookpolymers.com All Rights Reserved