Songhan Plastic Technology Co.,Ltd.

Resinlab® CYNERGY CA6604 Adhesive

Category Polymer , Adhesive , Thermoset , Acrylic/Cyanoacrylate Adhesive
Manufacturer Resinlab®
Trade Name CYNERGY
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Resinlab® CYNERGY CA6604 Adhesive.pdf
  Online Service   lookpolymers   27660005
Material Notes:
Description: The CYNERGY 6600 SERIES are modified to provide greatly reduced odor and frosting of plastics. These products are ideal for bonding dissimilar materials with excellent performance on a wide range of surfaces. They also reduce the need for extensive ventilation equipment.Application: The CYNERGY SERIES of the cyanoacrylates should be applied in small amounts to one surface only. The parts should then be mated together under slight pressure. This causes the adhesive to spread out into a thin film and assures optimum adhesive performance. The pressure need only be applied for several seconds. The CYNERGY SERIES cures rapidly allowing for bonded parts to be handled within 10 to 60 seconds for most applications. Full cure is normally within 24 hours.Information Provided by Resinlab L.L.C., an Ellsworth Adhesives Company.
Physical Properties Metric English Comments
Specific Gravity 1.08 g/cc
1.08 g/cc
Viscosity 1000 cP
1000 cP
Mechanical Properties Metric English Comments
Tensile Strength, Yield 12.4 MPa
1800 psi
Adhesive Bond Strength 20.0 MPa
2900 psi
Steel lap shear
Thermal Properties Metric English Comments
Maximum Service Temperature, Air 93.3 °C
200 °F
Minimum Service Temperature, Air -53.9 °C
-65.0 °F
Processing Properties Metric English Comments
Cure Time >= 0.333 min
>= 0.00556 hour
480 min
8.00 hour
Full cure
Descriptive Properties Value Comments
Base Modified
Color Clear
Gap Fill (mil) 8
Copyright © All Rights Reserved