Ravago Manufacturing Americas Hylac® FR134 ABS

Category	Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS), Unreinforced, Flame Retardant
Manufacturer	Ravago Manufacturing Americas, LLC
Trade Name	Hylac®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ravago Manufacturing Americas Hylac® FR134 ABS.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Entec's proprietary products include a full range of compounds in the Nylon 6/6, Nylon 6, ABS, PBT, Polycarbonate, PC/ABS, PC/ASA, PC/PBT, and PPO/PPE resin families.Information provided by Ravago.

Physical Properties	Metric	English	Comments
Density	1.20 g/cc	0.0434 lb/in³	ASTM D792
Linear Mold Shrinkage	0.0030 - 0.0070 cm/cm	0.0030 - 0.0070 in/in	ASTM D955
Melt Flow	5.2 g/10 min @Load 5.00 kg, Temperature 200 °C	5.2 g/10 min @Load 11.0 lb, Temperature 392 °F	ASTM D1238
	13 g/10 min @Load 3.80 kg, Temperature 230 °C	13 g/10 min @Load 8.38 lb, Temperature 446 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	100	100	ASTM D785
Tensile Strength, Yield	37.9 MPa	5500 psi	ASTM D638
Elongation at Break	15 %	15 %	ASTM D638
Tensile Modulus	2.48 GPa	360 ksi	ASTM D638
Flexural Yield Strength	60.7 MPa	8800 psi	ASTM D790
Flexural Modulus	2.07 GPa	300 ksi	ASTM D790
Izod Impact, Notched	1.55 J/cm	2.90 ft-lb/in	0.25 in; ASTM D256
	1.98 J/cm	3.70 ft-lb/in	73°F, 0.125 in; ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	130 µm/m-°C @Temperature -40.0 - 176 °C	72.0 µin/in-°F @Temperature -40.0 - 349 °F	ASTM D696
Deflection Temperature at 0.46 MPa (66 psi)	82.8 °C	181 °F	Unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	72.8 °C	163 °F	Unannealed; ASTM D648
Vicat Softening Point	87.8 °C	190 °F	ASTM D1525
Flammability, UL94	V-0	V-0	0.0590 in
	V-0	V-0	0.0980 in
	5VA	5VA	0.0980 in.

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+15 ohm-cm	1.00e+15 ohm-cm	ASTM D257

Processing Properties	Metric	English	Comments
Rear Barrel Temperature	166 - 177 °C	330 - 350 °F
Middle Barrel Temperature	168 - 185 °C	335 - 365 °F
Front Barrel Temperature	179 - 191 °C	355 - 375 °F
Nozzle Temperature	174 - 185 °C	345 - 365 °F
Melt Temperature	202 °C	395 °F	Aim
Mold Temperature	40.6 - 71.1 °C	105 - 160 °F
Moisture Content	<= 0.10 %	<= 0.10 %
Injection Pressure	4.90 - 5.86 MPa	710 - 850 psi
Back Pressure	0.483 - 0.965 MPa	70.0 - 140 psi
Shot Size	40 - 80 %	40 - 80 %
Screw Speed	50 - 90 rpm	50 - 90 rpm

Descriptive Properties	Value	Comments
Holding Pressure	570 to 710 psi
Injection Rate	Slow-Moderate

Users viewing this material also viewed the following: