- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyetherimide (PEI)
- Quadrant EPP Semitron® ESd 420- CM Dissipative Polyetherimide(ASTM Product Data Sheet)
Quadrant EPP Semitron® ESd 420- CM Dissipative Polyetherimide(ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Polyetherimide (PEI) |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Semitron® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Semitron® ESd 420- CM Dissipative Polyetherimide(ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.34 g/cc | 1.34 g/cc | ASTM D792 |
| Water Absorption | 0.50 % | 0.50 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 2.9 % | 2.9 % | Immersion; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 118 | 118 | ASTM D785 |
| Hardness, Shore D | 85 | 85 | ASTM D2240 |
| Tensile Strength | 79.3 MPa | 11500 psi | ASTM D638 |
| Elongation at Break | 2.0 % | 2.0 % | ASTM D638 |
| Tensile Modulus | 4.41 GPa | 640 ksi | ASTM D638 |
| Flexural Strength | 100 MPa | 14500 psi | ASTM D790 |
| Flexural Modulus | 4.48 GPa | 650 ksi | ASTM D790 |
| Compressive Strength | 164 MPa | 23800 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 2.55 GPa | 370 ksi | ASTM D695 |
| Shear Strength | 55.3 MPa | 8020 psi | ASTM D732 |
| Izod Impact, Notched | 0.534 J/cm | 1.00 ft-lb/in | ASTM D256 Type A |
| Coefficient of Friction, Dynamic | 0.27 | 0.27 | Dry vs. Steel; QTM55007 |
| K (wear) Factor | 201 x 10-8 mm³/N-M | 100 x 10-10 in³-min/ft-lb-hr | QTM 55010 |
| Limiting Pressure Velocity | 0.333 MPa-m/sec | 9500 psi-ft/min | 4:1 safety factor; QTM 55007 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 35.1 µm/m-°C @Temperature -40.0 - 149 °C |
19.5 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Thermal Conductivity | 0.218 W/m-K | 1.51 BTU-in/hr-ft²-°F | ASTM F433 |
| Maximum Service Temperature, Air | 171 °C | 340 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 210 °C | 410 °F | ASTM D648 |
| Glass Transition Temp, Tg | 210 °C | 410 °F | ASTM D3418 |
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | 1.00e+6 - 1.00e+9 ohm | 1.00e+6 - 1.00e+9 ohm | EOS/ESD S11.11 |
| Dielectric Constant | 5.63 @Frequency 1e+6 Hz |
5.63 @Frequency 1e+6 Hz |
ASTM D150 |
| Dissipation Factor | 0.266 @Frequency 1e+6 Hz |
0.266 @Frequency 1e+6 Hz |
ASTM D150 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | No | No | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Unacceptable | Unacceptable | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Unacceptable | Unacceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Unacceptable | Unacceptable | |
| Conductive / Static Dissipative | Yes | Yes | |
| Continuous Sunlight | Acceptable | Acceptable | |
| Hot Water / Steam | Acceptable | Acceptable | |
| Hydrocarbons - Aliphatic | Limited | Limited | |
| Hydrocarbons - Aromatic | Unacceptable | Unacceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Unacceptable | Unacceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Machinability | 4 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- RheTech Products HP517-00 23% Talc Reinforced High Performance Polypropylene Copolymer, Non-UV Stabilized, Natural
- Nanocyl EPOCYL™ NC R128-04 Master Batch Liquid Bisphenol-A Resin for Solvent Based Formulation Purposes: Dilution Factor 6
- Haynes 214® alloy sheet
- Tipco Tipcolite® TPF 1011 - Unreinforced Thermoset Phenolic Resin, 43 mm Norton Flow without Hexamine
- Westlake Elevate™ EB591 9% EVA Copolymer
- 3M 764 General Purpose Vinyl Tape
- BASF Ultramid® KR 4355 G5 BK 00564 25% Glass Filled PA6/6T (Conditioned)
- 3M Scotch™ 2210 Vinyl Mastic Pads and Rolls
- A. Schulman ComAlloy Lubrilon® 632 Nylon 6/6, Carbon Fiber/PTFE Filled
Copyright © lookpolymers.com All Rights Reserved