Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Quadrant EPP Duratron® PI D7000 PI Unfilled Polyimide (ASTM Product Data Sheet)

Category Polymer , Thermoplastic , Polyimide, Thermoplastic
Manufacturer Quadrant Engineering Plastics Products
Trade Name Duratron® PI
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Quadrant EPP Duratron® PI D7000 PI Unfilled Polyimide (ASTM Product Data Sheet).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Physical Properties Metric English Comments
Specific Gravity 1.37 g/cc
1.37 g/cc
ASTM D792
Water Absorption 0.70 %
0.70 %
Immersion, 24hr; ASTM D570(2)
Water Absorption at Saturation 3.8 %
3.8 %
ASTM D570(2)
Mechanical Properties Metric English Comments
Hardness, Rockwell R 128
128
ASTM D785
Hardness, Shore D 90
90
ASTM D2240
Tensile Strength 121 MPa
17500 psi
ASTM D638
Elongation at Break 6.0 %
6.0 %
ASTM D638
Tensile Modulus 3.72 GPa
540 ksi
ASTM D638
Flexural Strength 172 MPa
25000 psi
ASTM D790
Flexural Modulus 3.79 GPa
550 ksi
ASTM D790
Compressive Strength 186 MPa
27000 psi
10% Deformation; ASTM D695
Compressive Modulus 2.62 GPa
380 ksi
ASTM D695
Shear Strength 110 MPa
16000 psi
ASTM D732
Izod Impact, Notched 0.534 J/cm
1.00 ft-lb/in
ASTM 256 Type 'A'
Coefficient of Friction, Dynamic 0.29
0.29
Dry vs. Steel; QTM 55007
K (wear) Factor 302 x 10-8 mm³/N-M
150 x 10-10 in³-min/ft-lb-hr
QTM55010
Limiting Pressure Velocity 0.525 MPa-m/sec
15000 psi-ft/min
4:1 safety factor; QTM 55007
Thermal Properties Metric English Comments
CTE, linear 40.5 µm/m-°C

@Temperature -40.0 - 149 °C
22.5 µin/in-°F

@Temperature -40.0 - 300 °F
ASTM E831
Thermal Conductivity 0.216 W/m-K
1.50 BTU-in/hr-ft²-°F
ASTM E1530
Melting Point 304 °C
580 °F
Maximum Service Temperature, Air 260 °C
500 °F
Continuous
Deflection Temperature at 1.8 MPa (264 psi) 354 °C
670 °F
ASTM D648
Glass Transition Temp, Tg 349 °C
660 °F
ASTM D3418
Flammability, UL94 V-0

@Thickness 3.17 mm
V-0

@Thickness 0.125 in
Electrical Properties Metric English Comments
Surface Resistivity per Square >= 1.00e+13 ohm
>= 1.00e+13 ohm
EOS/ESD S11.11
Dielectric Constant 3.2

@Frequency 1.00e+6 Hz
3.2

@Frequency 1.00e+6 Hz
ASTM D150
Dielectric Strength 15.6 kV/mm
395 kV/in
Short Term; ASTM D149
Dissipation Factor <= 0.0050

@Frequency 1.00e+6 Hz
<= 0.0050

@Frequency 1.00e+6 Hz
ASTM D150
Compliance Properties Metric English Comments
3A-Dairy No
No
Canada AG No
No
FDA No
No
NSF No
No
USDA No
No
USP Class VI No
No
Chemical Resistance Properties Metric English Comments
Acids, Strong (pH 1-3) Limited
Limited
Acids, Weak Acceptable
Acceptable
Alcohols Acceptable
Acceptable
Alkalies, Strong (pH 11-14) Unacceptable
Unacceptable
Alkalies, Weak Limited
Limited
Chlorinated Solvents Acceptable
Acceptable
Conductive / Static Dissipative No
No
Continuous Sunlight Limited
Limited
Hot Water / Steam Limited
Limited
Hydrocarbons - Aliphatic Acceptable
Acceptable
Hydrocarbons - Aromatic Acceptable
Acceptable
Inorganic Salt Solutions Acceptable
Acceptable
Ketones, Esters Acceptable
Acceptable
Copyright © lookpolymers.com All Rights Reserved