Premix Thermoplastics PRE-ELEC® PP 1394 Conductive Thermoplastic Compound

Category	Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene with Carbon Black Filler
Manufacturer	Premix Thermoplastics Inc.
Trade Name	PRE-ELEC®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Premix Thermoplastics PRE-ELEC® PP 1394 Conductive Thermoplastic Compound.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

PRE-ELEC® PP 1394 is a conductive thermoplastic compound based on polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electrical resistivity PRE-ELEC® PP 1394 has excellent mechanical properties and is easy to extrude. PRE-ELEC® PP 1394 is recommended to be used in thin co-extrusion applications e.g. in coextruded conductive PP tape, film or sheet.Processing: PRE-ELEC® PP 1394 compound can be extruded in the machines using normal processing conditions as with polypropylene.Test Specimen: 10[mm] wide moulded rodInformation from Premix OY

Physical Properties	Metric	English	Comments
Density	1.06 g/cc	0.0383 lb/in³
Thickness	102 microns	4.00 mil
Linear Mold Shrinkage	0.012 - 0.017 cm/cm	0.012 - 0.017 in/in	ISO 294-4
Melt Flow	1.0 g/10 min @Load 2.16 kg, Temperature 230 °C	1.0 g/10 min @Load 4.76 lb, Temperature 446 °F	ISO 1133
	15 g/10 min @Load 5.00 kg, Temperature 230 °C	15 g/10 min @Load 11.0 lb, Temperature 446 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	98	98	ISO 868
Hardness, Shore D	73	73	ISO 868
Film Elongation at Break, MD	5.0 % @Thickness 0.400 mm	5.0 % @Thickness 0.0157 in	ISO 527
Flexural Modulus	2.30 GPa	334 ksi	ISO 178
Izod Impact, Notched (ISO)	1.20 kJ/m² @Thickness 4.00 mm, Temperature -20.0 °C	0.571 ft-lb/in² @Thickness 0.157 in, Temperature -4.00 °F	ISO 180
	1.50 kJ/m² @Thickness 4.00 mm, Temperature 23.0 °C	0.714 ft-lb/in² @Thickness 0.157 in, Temperature 73.4 °F	ISO 180
Izod Impact, Unnotched (ISO)	9.00 kJ/m² @Thickness 4.00 mm, Temperature -20.0 °C	4.28 ft-lb/in² @Thickness 0.157 in, Temperature -4.00 °F	ISO 180
	16.0 kJ/m² @Thickness 4.00 mm, Temperature 23.0 °C	7.61 ft-lb/in² @Thickness 0.157 in, Temperature 73.4 °F	ISO 180
Charpy Impact Unnotched	0.500 J/cm² @Thickness 102 mm, Temperature -20.0 °C	2.38 ft-lb/in² @Thickness 4.00 in, Temperature -4.00 °F	ISO 179
	1.40 J/cm² @Thickness 102 mm, Temperature 23.0 °C	6.66 ft-lb/in² @Thickness 4.00 in, Temperature 73.4 °F	ISO 179
Charpy Impact, Notched	0.200 J/cm² @Thickness 102 mm, Temperature -20.0 °C	0.952 ft-lb/in² @Thickness 4.00 in, Temperature -4.00 °F	ISO 179
	0.400 J/cm² @Thickness 102 mm, Temperature 23.0 °C	1.90 ft-lb/in² @Thickness 4.00 in, Temperature 73.4 °F	ISO 179
Film Tensile Strength at Break, MD	30.0 MPa @Thickness 0.400 mm	4350 psi @Thickness 0.0157 in	ISO 527

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	110 °C	230 °F	75/Method Bf
Deflection Temperature at 1.8 MPa (264 psi)	63.0 °C	145 °F	75/Method Af
Vicat Softening Point	156 °C	313 °F	ISO 306/A50

Electrical Properties	Metric	English	Comments
Volume Resistivity	<= 10 ohm-cm @Thickness 0.400 mm	<= 10 ohm-cm @Thickness 0.0157 in	ISO D-257
Surface Resistance	<= 100 ohm @Thickness 0.400 mm	<= 100 ohm @Thickness 0.0157 in	ISO IEC 61340-5-1

Processing Properties	Metric	English	Comments
Zone 1	210 °C	410 °F	Cylinder
	230 °C	446 °F	Die
Zone 2	220 °C	428 °F	Cylinder
	230 °C	446 °F	Die
Zone 3	220 °C	428 °F	Die
	220 °C	428 °F	Cylinder
Zone 4	230 °C	446 °F	Die
	230 °C	446 °F	Cylinder
Zone 5	230 °C	446 °F	Die
	230 °C	446 °F	Cylinder
Roll Temperature	60.0 °C	140 °F	3rd Roll
	80.0 °C	176 °F	2nd Roll
	90.0 °C	194 °F	1st Roll
Drying Temperature	60.0 - 80.0 °C	140 - 176 °F	Pre-drying
Dry Time	2 - 4 hour	2 - 4 hour
Shelf Life	12.0 Month	12.0 Month	Normal Storing Conditions

Users viewing this material also viewed the following: