- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Thermoset Fluoroelastomer
- Precision Polymer Engineering V90H Fluoroelastomer Compound
Precision Polymer Engineering V90H Fluoroelastomer Compound
| Category | Polymer , Thermoset , Fluoropolymer, TS , Thermoset Fluoroelastomer , Rubber or Thermoset Elastomer (TSE) |
| Manufacturer | Precision Polymer Engineering Limited |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Precision Polymer Engineering V90H Fluoroelastomer Compound.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Fluoroelastomer Rubber, 85-95 °IRHD. Copolymer of vinylidene fluoride and hexafluoropropylene. Formulated using only those ingredients determined by the United States Federal Food and Drug Administration (FDA). ASTM designation = FKM. ISO designation = FPM.Applications: Excellent oil and heat resistance. Ideal for mouldings which are required to operate within the approximate temperature range of -20° to +200°C, in contact with air.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 90 | 90 | °IRHD; ASTM D1415 |
| 84 - 96 | 84 - 96 | °IRHD, ±6 change after 72 hours @ 250°C; ASTM D1415 | |
| Tensile Strength, Yield | 8.80 MPa | 1280 psi | -20% change after 72 hours @ 250°C; ASTM D412 |
| 11.0 MPa | 1600 psi | ASTM D412 | |
| Elongation at Break | 80 % | 80 % | -20% change after 72 hours @ 250°C; ASTM D412 |
| 100 % | 100 % | ASTM D412 | |
| Compression Set | 20 % | 20 % | 24 hours @ 200°C; ASTM D395 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 200 °C | 392 °F | |
| Minimum Service Temperature, Air | -20.0 °C | -4.00 °F | |
| Flash Point | >= 315 °C | >= 599 °F |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved