- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Thermoset Fluoroelastomer
- Precision Polymer Engineering F80X Fluorosilicone Rubber
Precision Polymer Engineering F80X Fluorosilicone Rubber
| Category | Polymer , Thermoset , Fluoropolymer, TS , Thermoset Fluoroelastomer , Rubber or Thermoset Elastomer (TSE) , Silicone |
| Manufacturer | Precision Polymer Engineering Limited |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Precision Polymer Engineering F80X Fluorosilicone Rubber.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Mid-Blue Fluorosilicone Rubber, 76-85 °IRHD . Fluorosilicone rubber having methyl, vinyl and fluorine substituent groups on the polymer chain. To meet Aerospace Specification Mil-R-25988B, Class 1, Grade 80.Applications: Intended for use in applications where resistance to jet fuels, hydraulic fluids, lubricants, silicone and ester-based fluids (but excluding certain phosphate esters) is required.
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 80 | 80 | °IRHD; ASTM D1415 |
| 75 - 90 | 75 - 90 | °IRHD, +10/-5 change after 70 hours @ 200°C; ASTM D1415 | |
| Tensile Strength, Yield | 4.16 MPa | 603 psi | -20% change after 70 hours @ 200°C; ASTM D412 |
| 5.20 MPa | 754 psi | ASTM D412 | |
| Elongation at Break | 56 % | 56 % | -20% change after 70 hours @ 200°C; ASTM D412 |
| 70 % | 70 % | ASTM D412 | |
| Compression Set | 40 % | 40 % | 22 hours @ 175°C; ASTM D395 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 200 °C | 392 °F | |
| Minimum Service Temperature, Air | -65.0 °C | -85.0 °F | |
| -57.0 °C | -70.6 °F | TR10 | |
| Flash Point | >= 300 °C | >= 572 °F |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved