- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Polypropylene, Glass/Mineral Reinforced
- Polyplastic Armlen® PP GF MF 30-1 Polypropylene, 30% Glass and Mineral Filled
Polyplastic Armlen® PP GF MF 30-1 Polypropylene, 30% Glass and Mineral Filled
| Category | Polymer , Thermoplastic , Polypropylene (PP) , Polypropylene, Glass/Mineral Reinforced |
| Manufacturer | Polyplastic Group |
| Trade Name | Armlen® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Polyplastic Armlen® PP GF MF 30-1 Polypropylene, 30% Glass and Mineral Filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Injection moldingInformation provided by PolyPlastic Group.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.13 g/cc | 0.0408 lb/in³ | ISO 1183 |
| Linear Mold Shrinkage, Flow | 0.0070 - 0.0080 cm/cm | 0.0070 - 0.0080 in/in | ISO 294-4 |
| Linear Mold Shrinkage, Transverse | 0.0070 - 0.0080 cm/cm | 0.0070 - 0.0080 in/in | ISO 294-4 |
| Melt Flow | 3.5 g/10 min @Load 2.16 kg, Temperature 230 °C |
3.5 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
| Ash | 30 % | 30 % | ISO 3451 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength at Break | 69.0 MPa | 10000 psi | ISO 527 |
| Flexural Strength | 85.0 MPa | 12300 psi | ISO 178 |
| Flexural Modulus | 3.64 GPa | 528 ksi | ISO 178 |
| Charpy Impact Unnotched | 4.10 J/cm² @Temperature 23.0 °C |
19.5 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eU |
| Charpy Impact, Notched | 1.20 J/cm² @Temperature 23.0 °C |
5.71 ft-lb/in² @Temperature 73.4 °F |
ISO 179/1eA |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 156 °C | 313 °F | ISO 75B |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 230 - 240 °C | 446 - 464 °F | |
| Mold Temperature | 60.0 °C | 140 °F |
Users viewing this material also viewed the following:
- Noble Polymers Ecobarrier™ 0512 Thermoplastic Olefin (TPO)
- Permabond HM161 Anaerobic Retaining Compound
- Lubriplate "A" Multi Purpose Spray Lubricant
- Master Bond Supreme 3HT-80 One Component, Toughened, Heat Curing Epoxy
- Universal Wire Works 320 Stainless Steel Electrode
- Braskem TS9022 Blown Film Extrusion Low Density Polyethylene
- Ascend Performance Materials Vydyne® 21SPG1 Nylon 66, DAM
- Loctite® 564 Thread Sealant
- DuPont Elvax® 4260 Ethylene Vinyl Acetate (discontinued **)
Copyright © lookpolymers.com All Rights Reserved