- HOME
- POLYMER SEARCH
- Thermoplastic
- Vinyl (PVC)
- PVC, Rigid Grade
- PolyOne Geon™ Vinyl Rigid Extrusion L1361 Polyvinyl Chloride, Rigid (PVC, Rigid)
PolyOne Geon™ Vinyl Rigid Extrusion L1361 Polyvinyl Chloride, Rigid (PVC, Rigid)
| Category | Polymer , Thermoplastic , Vinyl (PVC) , PVC, Rigid Grade |
| Manufacturer | PolyOne Corporation |
| Trade Name | Geon™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PolyOne Geon™ Vinyl Rigid Extrusion L1361 Polyvinyl Chloride, Rigid (PVC, Rigid).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by PolyOne
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.38 g/cc | 1.38 g/cc | ASTM D792 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 81 | 81 | 15 sec; ASTM D2240 |
| Tensile Strength, Yield | 50.5 MPa | 7320 psi | Type I, 5.1 mm/min; ASTM D638 |
| Tensile Modulus | 2.83 GPa | 410 ksi | Type I, 5.1 mm/min; ASTM D638 |
| Flexural Strength | 104 MPa | 15100 psi | ASTM D790 |
| Flexural Modulus | 2.90 GPa | 421 ksi | ASTM D790 |
| Izod Impact, Notched | 0.510 J/cm @Thickness 3.18 mm, Temperature -40.0 °C |
0.955 ft-lb/in @Thickness 0.125 in, Temperature -40.0 °F |
Compression Molded; ASTM D256A |
| Dart Drop Total Energy | 62.3 J/cm @Temperature 23.0 °C |
0.117 ft-lb/mil @Temperature 73.4 °F |
Procedure A, C.125; ASTM D4226 |
| 133 J/cm @Temperature 23.0 °C |
0.249 ft-lb/mil @Temperature 73.4 °F |
Procedure B, C.125; ASTM D4226 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 52.0 µm/m-°C | 28.9 µin/in-°F | ASTM D696 |
| Deflection Temperature at 1.8 MPa (264 psi) | 70.0 °C @Thickness 3.18 mm |
158 °F @Thickness 0.125 in |
Unannealed; ASTM D648 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Temperature | 182 - 193 °C | 360 - 379 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Agency Ratings | NSF 51 | |
| NSF Type I | ||
| Ease of Sizing | Good | |
| Features | Good Chemical Resistance | |
| Forms | Pellets | |
| Generic Material | PVC, Rigid | |
| Generic Name | Polyvinyl Chloride, Rigid (PVC, Rigid) | |
| Processing Method | Extrusion | |
| PVC Cell Classification | 12454 | ASTM D1784 |
| Regional Availability | Africa & Middle East | |
| Asia Pacific | ||
| Europe | ||
| North America | ||
| South America | ||
| Uses | Piping |
Users viewing this material also viewed the following:
- Nye Lubricants UniFlor 8132S (UF) Synthetic Oil
- SABIC Innovative Plastics LNP THERMOCOMP DZ004 PC (Asia Pacific)
- Teknor Apex Monprene® MP-2455N Thermoplastic Elastomer
- CeramTec 665 Steatite, MgO•SiO2
- Epoxy Technology EPO-TEK® E2036 Epoxy
- EMS-Grivory Grivory® HT1V-5 FWA nat PA6T/6I-GF50
- Americas Styrenics STYRON® 404 High Impact Polystyrene
- 3M Envision™ 480Cv3 Print Wrap Film
- Plaslok 7021 Black Impact Grade Phenolic Molding Compound (discontinued **)
Copyright © lookpolymers.com All Rights Reserved