POLYMER SEARCH

Polikim KESTAMID® HS Polyamide 6, Heat Resistant

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Heat Stabilized
Manufacturer	Polikim Polimer ve Kimya Sanay
Trade Name	KESTAMID®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Polikim KESTAMID® HS Polyamide 6, Heat Resistant.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Kestamid-HS® is Polikim’s cast polyamide with increased heat resistance. Thermal stabilizer additives increase thermal aging significantly. In operating temperatures over 80°C, it performs with a longer duration compared to other extrusion and cast polyamide types. Its continuous operating temperature increases by 15-30°C compared to Kestamid® and reaches the 125-140°C interval. Thanks to its short term operating temperature that reaches 185-200°C interval, it is used safely in many applications that require heat resistance.Information provided by Polikim Polimer.

Physical Properties	Metric	English	Comments
Density	1.15 g/cc	0.0415 lb/in³	ISO 1183
Water Absorption at Saturation	6.0 %	6.0 %	ISO 62

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	84	84	ISO 868
Tensile Strength, Ultimate	78.5 MPa	11400 psi	ISO 527
Elongation at Break	>= 20 %	>= 20 %	ISO 527
Tensile Modulus	4.00 GPa	580 ksi	ISO 527
Compressive Strength	93.2 MPa	13500 psi	ISO 604
Compressive Modulus	2.70 GPa	392 ksi	ISO 604
Izod Impact, Notched (ISO)	5.60 kJ/m²	2.66 ft-lb/in²	ISO 180
Charpy Impact Unnotched	NB	NB	ISO 179
Coefficient of Friction	0.39	0.39
K Factor (Wear Factor)	0.44	0.44	[mg/km]
K (wear) Factor	500 x 10^-8 mm³/N-M	248 x 10^-10 in³-min/ft-lb-hr

Thermal Properties	Metric	English	Comments
CTE, linear	80.0 µm/m-°C	44.4 µin/in-°F	ISO 11359
Melting Point	220 °C	428 °F
Maximum Service Temperature, Air	125 °C	257 °F	continuous
	185 °C	365 °F	short term

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+14 ohm-cm	>= 1.00e+14 ohm-cm	ISO 60093
Surface Resistance	>= 1.00e+13 ohm	>= 1.00e+13 ohm	ISO 60093
Dielectric Constant	3.7	3.7	ISO 60250
Dielectric Strength	25.0 kV/mm	635 kV/in	ISO 50243

Users viewing this material also viewed the following: