Plenco 4504 Phenolic, Granular, Compression Molded

Category	Polymer , Thermoset , Filled/Reinforced Thermoset , Phenolic , Phenolic, Novolac, Mineral/Cellulose Filled
Manufacturer	Plenco (Plastics Engineering Company)
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Plenco 4504 Phenolic, Granular, Compression Molded.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Plenco 04504 is a renumber of Plaslok 504. Plenco 04504 is a two-stage, mineral and cellulose-filled phenolic molding compound having better impact and heat resistance than general purpose molding compounds. Since it also has good electrical properties, it has found use in a wide variety of wiring device applications. It is UL recognized under file E40654.Information supplied by Plenco.

Physical Properties	Metric	English	Comments
Bulk Density	0.660 g/cc	0.0238 lb/in³	ASTM D1895
Density	1.57 g/cc	0.0567 lb/in³	ASTM D792
Water Absorption	0.223 %	0.223 %	ASTM D570
Linear Mold Shrinkage	0.00283 cm/cm	0.00283 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell E	83	83	ASTM D785
Tensile Strength, Ultimate	49.0 MPa	7110 psi	ASTM D638
Elongation at Break	0.51 %	0.51 %	ASTM D638
Tensile Modulus	11.3 GPa	1640 ksi	ASTM D638
Flexural Strength	74.0 MPa	10700 psi	ASTM D790
Flexural Modulus	9.80 GPa	1420 ksi	ASTM D790
Compressive Strength	183 MPa	26500 psi	ASTM D695
Izod Impact, Notched	0.174 J/cm	0.326 ft-lb/in	ASTM D256
Charpy Impact, Notched	0.207 J/cm²	0.985 ft-lb/in²	ASTM D256
Impact	98	98	J/m Drop Ball Impact; PLENCO

Thermal Properties	Metric	English	Comments
Maximum Service Temperature, Air	200 °C	392 °F	Heat Resistance; ASTM D570D
Deflection Temperature at 1.8 MPa (264 psi)	191 °C	376 °F	ASTM D648
Flammability, UL94	V-0 @Thickness 1.50 mm	V-0 @Thickness 0.0591 in
Shrinkage	0.127 %	0.127 %	72 hr, 120ºC; ASTM D1299

Electrical Properties	Metric	English	Comments
Volume Resistivity	3.00e+12 ohm-cm	3.00e+12 ohm-cm	ASTM D247
Dielectric Constant	5.1	5.1	ASTM D150
Dielectric Strength	13.1 kV/mm	333 kV/in	Short Time; ASTM D149
Dissipation Factor	0.044	0.044	ASTM D150
Arc Resistance	171 sec	171 sec	ASTM D495
Comparative Tracking Index	200 V	200 V	ASTM D3638

Users viewing this material also viewed the following: