- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 6
- Nylon 6, 30% Mineral Filled
- PlastxWorld Veroplas PA5300 Nylon 6
PlastxWorld Veroplas PA5300 Nylon 6
| Category | Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 30% Mineral Filled |
| Manufacturer | PlastxWorld, Inc. |
| Trade Name | Veroplas |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | PlastxWorld Veroplas PA5300 Nylon 6.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
general purpose, 30% mineral filled injection molding gradeInformation provided by PlastxWorld Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.35 g/cc | 0.0488 lb/in³ | ASTM A792 |
| Moisture Absorption at Equilibrium | <= 0.17 % | <= 0.17 % | Karl Fischer |
| Linear Mold Shrinkage | 0.010 cm/cm | 0.010 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 75.2 MPa | 10900 psi | ASTM D638 |
| Elongation at Break | 15 % | 15 % | ASTM D638 |
| Flexural Yield Strength | 100 MPa | 14500 psi | ASTM D790 |
| Flexural Modulus | 3.00 GPa | 435 ksi | ASTM D790 |
| Izod Impact, Notched | 0.550 J/cm | 1.03 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 1.8 MPa (264 psi) | 93.0 °C | 199 °F | ASTM D648 |
| Vicat Softening Point | 191 °C | 376 °F | ASTM D1525 |
| Glow Wire Test | 649 °C | 1200 °F | UNE 20-672-83 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved