Parker Chomerics THERM-A-FORM T646 Cure-in-Place Potting and Underfill Material

Category	Polymer , Thermoset , Silicone
Manufacturer	Parker Chomerics
Trade Name	THERM-A-FORM
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Parker Chomerics THERM-A-FORM T646 Cure-in-Place Potting and Underfill Material.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Description: THERM-A-FORM™ thermally conductive silicone elastomer products are dispensable form-in-place compounds designed for heat transfer without excessive compressive force in electronics cooling applications. These versatile liquid reactive materials can be dispensed and cured into complex geometries for cooling of multi-height components on a PCB without the expense of a molded sheet. Each compound is available in ready-to-use cartridge systems, eliminating weighing, mixing, and degassing procedures.Product Attributes: Provides combination of high thermal performance and low costInformation provided by Chomerics

Physical Properties	Metric	English	Comments
Specific Gravity	2.45 g/cc	2.45 g/cc	ASTM D792
Viscosity	3.0 cP	3.0 cP	ASTM D2196
Outgassing - Total Mass Loss	0.10 %	0.10 %	CVCM; ASTM D595
	0.17 %	0.17 %	TML; ASTM D595

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	50	50	ASTM D2240

Thermal Properties	Metric	English	Comments
CTE, linear	250 µm/m-°C	139 µin/in-°F	ASTM E831
Specific Heat Capacity	1.00 J/g-°C	0.239 BTU/lb-°F	ASTM E1269
Thermal Conductivity	0.900 W/m-K	6.25 BTU-in/hr-ft²-°F	ASTM D5470
Maximum Service Temperature, Air	150 °C	302 °F
Minimum Service Temperature, Air	-50.0 °C	-58.0 °F
Brittleness Temperature	-55.0 °C	-67.0 °F	ASTM D2137
Flammability, UL94	HB	HB

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+14 ohm-cm	1.00e+14 ohm-cm	ASTM D257
Dielectric Constant	6.5 @Frequency 1.00e+6 Hz	6.5 @Frequency 1.00e+6 Hz	ASTM D150
Dielectric Strength	10.0 kV/mm	254 kV/in	ASTM D149
Dissipation Factor	0.013 @Frequency 1.00e+6 Hz	0.013 @Frequency 1.00e+6 Hz	Chomerics

Processing Properties	Metric	English	Comments
Cure Time	3.00 min @Temperature 150 °C	0.0500 hour @Temperature 302 °F
	60.0 min @Temperature 60.0 °C	1.00 hour @Temperature 140 °F
	2880 min @Temperature 23.0 °C	48.0 hour @Temperature 73.4 °F
Pot Life	300 min @Temperature 23.0 °C	300 min @Temperature 73.4 °F	2X Starting Viscosity
Shelf Life	3.00 Month	3.00 Month	From date of Manufacture

Descriptive Properties	Value	Comments
Binder	Silicone
Color	Yellow
Extractable Silicone	0.15
Filler	Aluminum Oxide
Mix Ratio	1:1
Number of Components	2-part

Users viewing this material also viewed the following: