Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Noltex Soarnol® DC3212 Ethylene Vinyl Alcohol Copolymer

Category Polymer , Thermoplastic , Ethylene Vinyl Alcohol (EVOH)
Manufacturer Noltex
Trade Name Soarnol®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Noltex Soarnol® DC3212 Ethylene Vinyl Alcohol Copolymer.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Ethylene content 32 mol%. Volatile matter 0.3%.The gas barrier property of Soarnol is about forty times better than that of nylon, therefore, Soarnol allows design of lower cost packages by using a thin gas barrier layer without loss of shelf life.Soarnol DC3212 with high melt flow index is one of the standard grade of Soarnol, its ethylene content is 32 mol%. Since Soarnol DC3212 has excellent gas barrier property, this resin is suited for coextruded film and coextrusion coating. This resin can also be used in coextruded pipe.Information provided by Soarus, LLC. In the United States SOARNOL is produced by Noltex, L.L.C., an affiliate of Nippon Gohsei.
Physical Properties Metric English Comments
Density 1.20 g/cc
0.0434 lb/in³
Moisture Vapor Transmission 0.960 - 1.74 cc-mm/m²-24hr-atm
2.44 - 4.42 cc-mil/100 in²-24hr-atm
40°C- 90% RH; based on 30 µm layer
Oxygen Transmission 0.0100 cc-mm/m²-24hr-atm
0.0254 cc-mil/100 in²-24hr-atm
20°C- 65% RH; based on 20 µm layer
Viscosity 400000 cP

@Shear Rate 190 1/s,
Temperature 230 °C
400000 cP

@Shear Rate 190 1/s,
Temperature 446 °F
Melt Flow 12 g/10 min

@Load 2.16 kg,
Temperature 210 °C
12 g/10 min

@Load 4.76 lb,
Temperature 410 °F
Thermal Properties Metric English Comments
Melting Point 183 °C
361 °F
DSC, both heating and cooling speeds of 20°C/min
Crystallization Temperature 160 °C
320 °F
DSC, both heating and cooling speeds of 20°C/min
Glass Transition Temp, Tg 61.0 °C
142 °F
DSC, both heating and cooling speeds of 20°C/min
Optical Properties Metric English Comments
Refractive Index 1.524
1.524
Quenched
1.533
1.533
Annealed at 140°C, 30 min
Processing Properties Metric English Comments
Nozzle Temperature 200 - 220 °C
392 - 428 °F
Copyright © lookpolymers.com All Rights Reserved