Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Network Polymers Softflex® 0615

Category Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Elastomer, Melt-Processible Rubber
Manufacturer Network Polymers
Trade Name Softflex®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Network Polymers Softflex® 0615.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Description: Softflex® Thermoplastic Elastomer AlloyInformation provided by Network Polymers Inc.
Physical Properties Metric English Comments
Specific Gravity 0.994 g/cc
0.994 g/cc
ASTM D792
Linear Mold Shrinkage, Flow 0.011 cm/cm

@Thickness 3.17 mm
0.011 in/in

@Thickness 0.125 in
ASTM D955
Linear Mold Shrinkage, Transverse 0.011 cm/cm

@Thickness 3.17 mm
0.011 in/in

@Thickness 0.125 in
ASTM D955
Melt Flow 8.3 g/10 min

@Load 1.00 kg,
Temperature 235 °C
8.3 g/10 min

@Load 2.20 lb,
Temperature 455 °F
Procedure A Condition Q; ASTM D1238
27 g/10 min

@Load 5.00 kg,
Temperature 200 °C
27 g/10 min

@Load 11.0 lb,
Temperature 392 °F
Procedure A Condition G; ASTM D1238
Mechanical Properties Metric English Comments
Hardness, Shore A 48 - 58
48 - 58
10 second dwell; ASTM D2240
50 - 60
50 - 60
Instantaneous; ASTM D2240
Tensile Strength, Yield 7.79 MPa
1130 psi
chs 20 in/min; ASTM D412
Elongation at Break 750 %
750 %
ASTM D412
50% Modulus 0.00138 GPa
0.200 ksi
ASTM D412
100% Modulus 0.00179 GPa
0.260 ksi
ASTM D412
300% Modulus 0.00448 GPa
0.650 ksi
ASTM D412
Flexural Modulus 0.0150 GPa
2.17 ksi
ASTM D790
Gardner Impact >= 36.2 J

@Temperature -30.0 °C
>= 26.7 ft-lb

@Temperature -22.0 °F
ASTM D5420
Tear Strength 28.4 kN/m
162 pli
ASTM D624
Taber Abrasion, mg/1000 Cycles 0.192
0.192
H22 Wheel 1000 g load/1000 cycles; ASTM D3389
Compression Set 18.4 %
18.4 %
Method B, 22 hours at 25% deflection and 23°C; ASTM D395
67.9 %

@Temperature 70.0 °C
67.9 %

@Temperature 158 °F
22 hours at 25% deflection; ASTM D395, Method B,
88.4 %

@Temperature 100 °C
88.4 %

@Temperature 212 °F
22 hours at 25% deflection; ASTM D395, Method B,
Tensile Set 9.3 %
9.3 %
100% strain; ASTM D412
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved