NOVA Chemicals Surpass® HPs167-AB Homopolymer sHDPE Film Resin

Category	Polymer , Film , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Film Grade
Manufacturer	NOVA Chemicals
Trade Name	Surpass®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	NOVA Chemicals Surpass® HPs167-AB Homopolymer sHDPE Film Resin.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

HPs167-AB complies with the U.S. FDA regulations for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food.NOVA Chemicals' polyethylene resins are biologically and chemically inert.Features: Superior barrier properties, Very high stiffness, Low gelAdditives: AntioxidantApplications: Moisture barrier films, Co-extrusion, Dry food packagingFilm properties are typical of blown film extruded on a 2.5" extruder with 4" die and 35-mil die gap at a blow up ratio of 2:1, but are dependent upon operating conditions.

Physical Properties	Metric	English	Comments
Density	0.966 g/cc	0.0349 lb/in³	ASTM D 792
Moisture Vapor Transmission	0.00418 cc-mm/m²-24hr-atm @Temperature 38.0 °C	0.0106 cc-mil/100 in²-24hr-atm @Temperature 100 °F	100% RH; ASTM F 1249
Oxygen Transmission	1.767 cc-mm/m²-24hr-atm	4.488 cc-mil/100 in²-24hr-atm	0% RH; ASTM D 3985
Thickness	38.0 microns	1.50 mil	As tested for properties on this data sheet
	25.0 - 75.0 microns	0.984 - 2.95 mil	Recommended range for processing
Melt Flow	1.2 g/10 min @Load 2.16 kg, Temperature 190 °C	1.2 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D 1238

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	27.0 MPa	3920 psi	ASTM D 882
Film Tensile Strength at Yield, TD	25.0 MPa	3630 psi	ASTM D 882
Elmendorf Tear Strength MD	22 g	22 g	ASTM D 1922
Elmendorf Tear Strength TD	225 g	225 g	ASTM D 1922
Elmendorf Tear Strength, MD	0.580 g/micron	14.7 g/mil	ASTM D 1922
Elmendorf Tear Strength, TD	5.90 g/micron	150 g/mil	ASTM D 1922
1% Secant Modulus, MD	1100 MPa	160000 psi	ASTM D 882
1% Secant Modulus, TD	1335 MPa	193600 psi	ASTM D 882

Processing Properties	Metric	English	Comments
Melt Temperature	200 - 230 °C	392 - 446 °F	Recommended
Die Opening	0.127 - 0.254 cm	0.0500 - 0.100 in	Recommended range
Blow-up Ratio (BUR)	1.5 - 3.0	1.5 - 3.0	Optimum range

Descriptive Properties	Value	Comments
Low Friction Puncture	19 (J/mm)	NOVA Chemicals test method

Users viewing this material also viewed the following: