NOVA Chemicals Surpass® FPs236-A Octene sMDPE Film Resin

Category	Polymer , Film , Thermoplastic , Polyethylene (PE) , MDPE , Medium Density Polyethylene (MDPE), Film Grade
Manufacturer	NOVA Chemicals
Trade Name	Surpass®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	NOVA Chemicals Surpass® FPs236-A Octene sMDPE Film Resin.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

FPs236-A complies with the U.S. FDA regulations for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food. FPs236-A is subject to the specific limitation that it may contact food only at temperatures of 212°F and below.NOVA Chemicals' polyethylene resins are biologically and chemically inert.Features: Excellent tensile and elongation properties, Good optical properties, Low gel levelAdditives: High temperature AOApplications: Cast film, Co-extrusion and laminationFilm properties are typical of cast film extruded at a melt temperature of 500°F, and a line speed of 600 ft/min.

Physical Properties	Metric	English	Comments
Density	0.936 g/cc	0.0338 lb/in³	ASTM D 792
Thickness	25.0 microns	0.984 mil	As tested for properties on this data sheet
Melt Flow	2.6 g/10 min @Load 2.16 kg, Temperature 190 °C	2.6 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D 1238

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	14.2 MPa	2060 psi	ASTM D 882
Film Tensile Strength at Yield, TD	15.1 MPa	2190 psi	ASTM D 882
Film Elongation at Break, MD	600 %	600 %	ASTM D 882
Film Elongation at Break, TD	900 %	900 %	ASTM D 882
Elmendorf Tear Strength MD	40 g	40 g	ASTM D 1922
Elmendorf Tear Strength TD	350 g	350 g	ASTM D 1922
Elmendorf Tear Strength, MD	1.60 g/micron	40.6 g/mil	ASTM D 1922
Elmendorf Tear Strength, TD	14.0 g/micron	356 g/mil	ASTM D 1922
Dart Drop	1.60 g/micron	40.6 g/mil	ASTM D 1709/A
Dart Drop Test	40.0 g	0.0882 lb	F50; ASTM D 1709/A
Film Tensile Strength at Break, MD	45.0 MPa	6530 psi	ASTM D 882
Film Tensile Strength at Break, TD	35.0 MPa	5080 psi	ASTM D 882
1% Secant Modulus, MD	300 MPa	43500 psi	ASTM D 882
1% Secant Modulus, TD	370 MPa	53700 psi	ASTM D 882

Optical Properties	Metric	English	Comments
Haze	4.8 %	4.8 %	ASTM D 1003
Gloss	80 %	80 %	At 45°; ASTM D 2457

Descriptive Properties	Value	Comments
Low Friction Puncture	24 (J/mm)	NOVA Chemicals test method

Users viewing this material also viewed the following: