NOVA Chemicals Surpass® FPs016-C Octene sLLDPE Film Resin

Category	Polymer , Film , Thermoplastic , Polyethylene (PE) , LLDPE , Linear Low Density Polyethylene (LLDPE)/Octene, Film
Manufacturer	NOVA Chemicals
Trade Name	Surpass®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	NOVA Chemicals Surpass® FPs016-C Octene sLLDPE Film Resin.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

FPs016-C complies with the U.S. FDA regulations for olefin polymers and may thus be used in the United States as an article or component of an article intended for use in contact with food.NOVA Chemicals' polyethylene resins are biologically and chemically inert.Features: Outstanding melt strength, Superior toughness with excellent tear strength, Excellent seal properties, Low gelAdditives: Process stabilizer, Polymer process aidApplications: Lamination Film, Coextruded sealant layer, High toughness filmFilm properties are typical of blown film extruded on a 2.5" extruder with 4" die and 35-mil die gap at a blow up ratio of 2.5:1, but are dependent upon operating conditions.

Physical Properties	Metric	English	Comments
Density	0.916 g/cc	0.0331 lb/in³	ASTM D 792
Thickness	25.0 microns	0.984 mil	As tested for properties on this data sheet
	12.7 - 127 microns	0.500 - 5.00 mil	Recommended range for processing
Melt Flow	0.65 g/10 min @Load 2.16 kg, Temperature 190 °C	0.65 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D 1238

Mechanical Properties	Metric	English	Comments
Film Tensile Strength at Yield, MD	8.50 MPa	1230 psi	ASTM D 882
Film Tensile Strength at Yield, TD	8.50 MPa	1230 psi	ASTM D 882
Film Elongation at Break, MD	470 %	470 %	ASTM D 882
Film Elongation at Break, TD	780 %	780 %	ASTM D 882
Elmendorf Tear Strength MD	350 g	350 g	ASTM D 1922
Elmendorf Tear Strength TD	430 g	430 g	ASTM D 1922
Elmendorf Tear Strength, MD	14.0 g/micron	356 g/mil	ASTM D 1922
Elmendorf Tear Strength, TD	17.2 g/micron	437 g/mil	ASTM D 1922
Dart Drop	28.0 g/micron	711 g/mil	ASTM D 1709/A
Dart Drop Test	700 g	1.54 lb	F50; ASTM D 1709/A
Film Tensile Strength at Break, MD	47.0 MPa	6820 psi	ASTM D 882
Film Tensile Strength at Break, TD	44.0 MPa	6380 psi	ASTM D 882
1% Secant Modulus, MD	126 MPa	18300 psi	ASTM D 882
1% Secant Modulus, TD	138 MPa	20000 psi	ASTM D 882
Heat Seal Strength Initiation Temperature	100 °C	212 °F	Temperature at which a 2-mil film achieves a seal strength of 4.4N/13mm. Tested at 0.5s dwell, 0.27 N/mm² bar pressure, 305mm/min. pull speed.

Optical Properties	Metric	English	Comments
Haze	7.0 %	7.0 %	LDPE blended; ASTM D 1003
	15 %	15 %	100% LLDPE; ASTM D 1003
Gloss	38 %	38 %	At 45°, 100% LLDPE; ASTM D 2457
	72 %	72 %	At 45°, LDPE blended; ASTM D 2457

Processing Properties	Metric	English	Comments
Melt Temperature	185 - 220 °C	365 - 428 °F	Recommended
Die Opening	0.0889 - 0.216 cm	0.0350 - 0.0850 in	Recommended range
Blow-up Ratio (BUR)	2.0 - 3.5	2.0 - 3.5	Optimum range

Descriptive Properties	Value	Comments
Low Friction Puncture	98 (J/mm)	NOVA Chemicals test method

Users viewing this material also viewed the following: