- HOME
- POLYMER SEARCH
- Thermoplastic
- Elastomer, TPE
- Multibase Multi-Flex® A 5904 LC TPE Thermoplastic Elastomer
Multibase Multi-Flex® A 5904 LC TPE Thermoplastic Elastomer
| Category | Polymer , Thermoplastic , Elastomer, TPE |
| Manufacturer | Multibase |
| Trade Name | Multi-Flex® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Multibase Multi-Flex® A 5904 LC TPE Thermoplastic Elastomer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Features: Chemical Resistance, Good Heat StabilizedOzone Resistant Forms:PelletsProcessing Method:Injection Molding Information provided by Multibase
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.07 g/cc | 1.07 g/cc | ASTM 792 |
| Linear Mold Shrinkage | 0.015 cm/cm | 0.015 in/in | ASTM D955 |
| Melt Flow | 1.5 g/10 min @Load 2.16 kg, Temperature 230 °C |
1.5 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 60 | 60 | 10 seconds; ASTM D2240 |
| Tensile Strength, Yield | 1.72 MPa | 250 psi | at 100% secant; ASTM D638 |
| 7.58 MPa | 1100 psi | Elastic; ASTM D638 | |
| Elongation at Break | 580 % | 580 % | ASTM D638 |
| Tear Strength | 26.3 kN/m | 150 pli | ASTM D624 |
| Compression Set | 16 % | 16 % | 73°F, 70 hours; ASTM D395 |
| 38 % | 38 % | 158°F, 70 hours; ASTM D395 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved