Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Momentive Performance Materials Siloprenâ„¢ FFSL 7051 Fully Fluorinated Liquid Silicone Rubber

Category Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) , Silicone , Silicone Rubber
Manufacturer Momentive Performance Materials (Former GE Silicones)
Trade Name Silopren™
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Momentive Performance Materials Siloprenâ„¢ FFSL 7051 Fully Fluorinated Liquid Silicone Rubber.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
This LSR elastomer is a fully fluorinated, two-component, platinum (addition/heat) curable, and pumpable silicone elastomer that can be molded and cured with very fast cycle times, at elevated temperatures. The molding process allows for complex part geometry and exact dimensions. LSR elastomers are generally suitable for short cycle time injection and full automatic flash-less processing. Color pastes are available to pigmenting addition cure productions of LSR's.All LSR grades are platinum cured materials which are mixed in a 1:1 ratio by weight.Industries and Applications: The Momentive portfolio of products is used for a wide variety of applications in the Automotive, Aviation and Aerospace, Consumer Goods, Consumer Electronics, Healthcare and Energy Industries.
Physical Properties Metric English Comments
Specific Gravity 1.44 g/cc
1.44 g/cc
Linear Mold Shrinkage 0.027 cm/cm
0.027 in/in
vulcanized 10 sec at 200°C; Without post-cure
0.035 cm/cm
0.035 in/in
vulcanized 10 sec at 200°C then post-cured
Mechanical Properties Metric English Comments
Hardness, Shore A 52
52
Tensile Strength 8.00 MPa
1160 psi
Elongation at Break 230 %
230 %
Tear Strength 23.0 kN/m
131 pli
Die B
Compression Set >= 17 %
>= 17 %
Post cured
Processing Properties Metric English Comments
Nozzle Temperature 20.0 °C
68.0 °F
cool nozzle and cylinder to prevent premature vulcanization
Mold Temperature 140 - 230 °C
284 - 446 °F
short vulcanization time required (a few seconds)
Injection Pressure 5.00 - 15.0 MPa
725 - 2180 psi
depends on feed channel
Hold Pressure 5.00 MPa
725 psi
Descriptive Properties Value Comments
Appearance Off White
Copyright © lookpolymers.com All Rights Reserved