Mitsui AURUM® JCL3030 Thermoplastic Polyimide Resin, Amorphous, Wear/Friction Grade (discontinued **)

Category	Polymer , Thermoplastic , Polyimide, Thermoplastic
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Mitsui AURUM® JCL3030 Thermoplastic Polyimide Resin, Amorphous, Wear/Friction Grade (discontinued **).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

AURUM® is an easy melt, processable and recyclable thermoplastic polyimide resin that provides continuous service temperatures to 465° F in its amorphous state and up to 550° F when annealed to its semicrystalline state. In addition, it displays low outgassing, superior radiation resistance and excellent chemical resistance properties.Applications: Components for automotive and aircraft enginesTransmissionFarming, off-road and construction equipmentIndustrial machineryElectric motors, pumps and compressorsBusiness machines such as laser pointers and high speed copy machinesElectronic and semiconductor transport mediaAnalytical and medical equipmentConveyors and textile equipmentInformation provided by Mitsui.

Physical Properties	Metric	English	Comments
Density	1.42 g/cc	0.0513 lb/in³	ASTM D792
Water Absorption	0.23 %	0.23 %	24 hours; ASTM D570
Moisture Absorption at Equilibrium	0.10 %	0.10 %	24 hours, 23°C, 60% RH
Linear Mold Shrinkage	0.0025 cm/cm	0.0025 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	105	105	ASTM D785
Hardness, Rockwell R	128	128	ASTM D785
Tensile Strength at Break	228.5 MPa	33140 psi	ASTM D638
Tensile Strength, Ultimate	141.2 MPa @Temperature 150 °C	20480 psi @Temperature 302 °F	ASTM D638
Elongation at Break	2.0 %	2.0 %	ASTM D638
	4.0 % @Temperature 150 °C	4.0 % @Temperature 302 °F	ASTM D638
Flexural Strength	313 MPa	45400 psi	ASTM D790
	212 MPa @Temperature 150 °C	30700 psi @Temperature 302 °F	ASTM D790
Flexural Modulus	17.2 GPa	2490 ksi	ASTM D790
	14.8 GPa @Temperature 150 °C	2150 ksi @Temperature 302 °F	ASTM D790
Compressive Strength	102 MPa @Temperature 150 °C	14800 psi @Temperature 302 °F	JIS K7208
	207 MPa @Temperature 23.0 °C	30000 psi @Temperature 73.4 °F	JIS K7208
Compressive Modulus	2.45 GPa	355 ksi	At 150°C; JIS K7208
	3.92 GPa	569 ksi	At 23°C; JIS K7208
Shear Strength	60.8 MPa @Temperature 150 °C	8820 psi @Temperature 302 °F	JIS K7214
	91.2 MPa @Temperature 23.0 °C	13200 psi @Temperature 73.4 °F	JIS K7214
Izod Impact, Notched	1.08 J/cm	2.02 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
CTE, linear	6.00 µm/m-°C @Temperature 23.0 °C	3.33 µin/in-°F @Temperature 73.4 °F	MD; ASTM D696
	6.00 µm/m-°C @Temperature 200 °C	3.33 µin/in-°F @Temperature 392 °F	MD; ASTM D696
CTE, linear, Transverse to Flow	47.0 µm/m-°C @Temperature 23.0 °C	26.1 µin/in-°F @Temperature 73.4 °F	ASTM D696
	47.0 µm/m-°C @Temperature 200 °C	26.1 µin/in-°F @Temperature 392 °F	ASTM D696
Specific Heat Capacity	0.920 J/g-°C @Temperature 23.0 °C	0.220 BTU/lb-°F @Temperature 73.4 °F	By DSC
	0.960 J/g-°C @Temperature 100 °C	0.229 BTU/lb-°F @Temperature 212 °F	By DSC
	1.42 J/g-°C @Temperature 300 °C	0.339 BTU/lb-°F @Temperature 572 °F	By DSC
Thermal Conductivity	0.4883 W/m-K	3.383 BTU-in/hr-ft²-°F
Melting Point	388 °C	730 °F
Maximum Service Temperature, Air	248 °C	478 °F	Heat distortion temperature, load unknown; ASTM D648
Glass Transition Temp, Tg	250 °C	482 °F	By DSC
Flammability, UL94	V-0 @Thickness 0.400 mm	V-0 @Thickness 0.0157 in	all color

Electrical Properties	Metric	English	Comments
Surface Resistance	1000 - 10000 ohm	1000 - 10000 ohm	ASTM D257

Processing Properties	Metric	English	Comments
Processing Temperature	390 - 420 °C	734 - 788 °F	Injection molding, extrusion

Users viewing this material also viewed the following: