- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LDPE
- Low Density Polyethylene (LDPE), Film Grade
- LyondellBasell Petrothene® NA272130 Medium Density Polyethylene, Film Extrusion Grade
LyondellBasell Petrothene® NA272130 Medium Density Polyethylene, Film Extrusion Grade
| Category | Polymer , Film , Thermoplastic , Polyethylene (PE) , LDPE , Low Density Polyethylene (LDPE), Film Grade |
| Manufacturer | LyondellBasell (former Equistar) |
| Trade Name | Petrothene® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | LyondellBasell Petrothene® NA272130 Medium Density Polyethylene, Film Extrusion Grade.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
PETROTHENE NA272130 is a medium density polyethylene resin designed for overwrap film applications. NA272130 exhibits good film optics and high stiffness.Regulatory Status: NA272130 meets the requirements of the Food and Drug Administration, regulation 21 CFR 177.1520. This regulation allows the use of this olefin polymer "...in articles or components of articles intended for use in contact with food." Specific limitations or conditions of use may apply. Contact your Equistar sales representative for more information. Specific recommendations for processing NA272130 can only be made when the processing conditions, equipment and end use are known. For further suggestions, please contact your Equistar sales representative.This product is from the former Equistar product line.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 0.930 g/cc | 0.0336 lb/in³ | ASTM D1505 |
| Thickness | 31.8 microns | 1.25 mil | |
| Melt Flow | 1.6 g/10 min | 1.6 g/10 min | ASTM D1238 |
| Antiblock Level | 1000 ppm | 1000 ppm | |
| Slip Level | 300 ppm | 300 ppm |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Film Elongation at Break, MD | 400 % | 400 % | ASTM D882 |
| Film Elongation at Break, TD | 500 % | 500 % | ASTM D882 |
| Dart Drop | 1.57 g/micron | 40.0 g/mil | F<sub>50</sub>; ASTM D1709 |
| Film Tensile Strength at Break, MD | 24.1 MPa | 3500 psi | ASTM D882 |
| Film Tensile Strength at Break, TD | 20.7 MPa | 3000 psi | ASTM D882 |
| 1% Secant Modulus, MD | 331 MPa | 48000 psi | ASTM D882 |
| 1% Secant Modulus, TD | 379 MPa | 55000 psi | ASTM D882 |
| Optical Properties | Metric | English | Comments |
|---|---|---|---|
| Haze | 7.0 % | 7.0 % | ASTM D1003 |
| Gloss | 90 % | 90 % | 60°; ASTM D523 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved