Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

LyondellBasell Alathon® L5005V High Density Polyethylene, HMW Film Grade

Category Polymer , Film , Thermoplastic , Polyethylene (PE) , MDPE , Medium Density Polyethylene (MDPE), Film Grade
Manufacturer LyondellBasell (former Equistar)
Trade Name Alathon®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF LyondellBasell Alathon® L5005V High Density Polyethylene, HMW Film Grade.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
ALATHON L5005V is a high molecular weight high density copolymer that provides broad bimodal molecular weight distribution, high stiffness and good heat seal response and strength. Typical applications include merchandise bags, grocery sacks, trash can liners, produce bags and roll stock. Materials of animal origin are not used as plasticizers, additives, or raw materials in L5005V. Regulatory Status: L5005V meets the requirements of the Food and Drug Administration regulation 21 CFR 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food. " Specific limitations or conditions of use may apply. Contact your Equistar sales representative for more information.Specific recommendations for processing L5005V can only be made when the processing conditions, equipment and end use are known. For further suggestions please contact your Equistar sales representative.This product is from the former Equistar product line.
Physical Properties Metric English Comments
Density 0.949 g/cc
0.0343 lb/in³
ASTM D1505
Melt Flow 0.057 g/10 min
0.057 g/10 min
ASTM D1238
Mechanical Properties Metric English Comments
Film Tensile Strength at Yield, MD 35.2 MPa
5100 psi
ASTM D882
Film Tensile Strength at Yield, TD 29.6 MPa
4300 psi
ASTM D882
Film Elongation at Break, MD 360 %
360 %
ASTM D882
Film Elongation at Break, TD 340 %
340 %
ASTM D882
Secant Modulus, MD 0.938 GPa
136 ksi
ASTM D882
Secant Modulus, TD 0.958 GPa
139 ksi
ASTM D882
Elmendorf Tear Strength MD 14 g
14 g
ASTM D1922
Elmendorf Tear Strength TD 35 g
35 g
ASTM D1922
Dart Drop Total Energy 1070 J/cm
2.00 ft-lb/mil
ASTM D4272
Film Tensile Strength at Break, MD 76.5 MPa
11100 psi
ASTM D882
Film Tensile Strength at Break, TD 66.2 MPa
9600 psi
ASTM D882
Processing Properties Metric English Comments
Melt Temperature 199 - 216 °C
390 - 420 °F
Die Opening 0.1016 - 0.127 cm
0.04000 - 0.0500 in
Blow-up Ratio (BUR) 3.5 - 4.5
3.5 - 4.5
Copyright © lookpolymers.com All Rights Reserved