- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyurethane, TP
- Thermoplastic Polyurethane (TPUR), Polyester Grade
- Lubrizol Estane® T460A Thermoplastic Polyurethane
Lubrizol Estane® T460A Thermoplastic Polyurethane
| Category | Polymer , Thermoplastic , Polyurethane, TP , Thermoplastic Polyurethane (TPUR), Polyester Grade |
| Manufacturer | Lubrizol (former Noveon) |
| Trade Name | ESTANE® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Lubrizol Estane® T460A Thermoplastic Polyurethane.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Type: Estane® T460A is a Shore 66A, polyester grade, plasticizer-free, with low hardness thermoplastic polyurethane (TPU).Uses: Injection Molding, Extrusion.Availability: AsiaInformation Provided by The Lubrizol Corporation
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.12 g/cc | 1.12 g/cc | ASTM D792 |
| Linear Mold Shrinkage | 0.013 cm/cm | 0.013 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 66 | 66 | ASTM D2240 |
| Tensile Strength, Ultimate | 19.6 MPa | 2840 psi | ASTM D412 |
| Tensile Strength, Yield | 2.16 MPa | 313 psi | at 100% elongation; ASTM D412 |
| 3.92 MPa | 569 psi | at 300% elongation; ASTM D412 | |
| Elongation at Break | 860 % | 860 % | ASTM D412 |
| Tear Strength | 58.8 kN/m | 336 pli | Die C; ASTM D624 |
| Compression Set | 10 % @Temperature 23.0 °C, Time 79200 sec |
10 % @Temperature 73.4 °F, Time 22.0 hour |
ASTM D395 |
| 30 % @Temperature 70.0 °C, Time 79200 sec |
30 % @Temperature 158 °F, Time 22.0 hour |
ASTM D395 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 75.0 °C | 167 °F | ASTM D1525 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Feed Temperature | 165 - 180 °C | 329 - 356 °F | |
| Nozzle Temperature | 175 - 190 °C | 347 - 374 °F | |
| Mold Temperature | 10.0 - 40.0 °C | 50.0 - 104 °F | |
| Drying Temperature | 70.0 - 80.0 °C | 158 - 176 °F | |
| Dry Time | 4.00 - 5.00 hour | 4.00 - 5.00 hour | |
| Injection Pressure | 8.27 - 13.8 MPa | 1200 - 2000 psi | |
| Hold Pressure | 5.52 - 9.65 MPa | 800 - 1400 psi | |
| Back Pressure | 0.207 - 0.552 MPa | 30.0 - 80.0 psi | |
| Cycle Time - Injection | 35 - 45 sec | 35 - 45 sec | |
| Screw Speed | 160 - 200 rpm | 160 - 200 rpm |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Injection time (s) | 15-20 | |
| Metering Zone | 170-185°C |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved