Lubrizol ESTANE® ETE50DS3 Ester Based Thermoplastic Polyurethane

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Polyester Grade
Manufacturer	Lubrizol (former Noveon)
Trade Name	ESTANE®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Lubrizol ESTANE® ETE50DS3 Ester Based Thermoplastic Polyurethane.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Features: Excellent physical and low temperature properties with very good chemical resistance and wide processing window for extrusion.Uses: Flat die/cast film and tubing extrusion and Injection and blow molding.Available in Americas, Europe, Middle East, Africa, India and AsiaInformation provided by Lubrizol.

Physical Properties	Metric	English	Comments
Specific Gravity	1.22 g/cc	1.22 g/cc	ASTM D792
Maximum Moisture Content	0.020	0.020

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	49 @Time 5.00 sec	49 @Time 0.00139 hour	ASTM D2240
Tensile Strength	65.5 MPa	9500 psi	ASTM D412
	65.5 MPa @Temperature 23.0 °C, Time 0.000 sec	9500 psi @Temperature 73.4 °F, Time 0.000 hour	Sheet Immersion in Diesel Fuel
	65.5 MPa @Temperature 23.0 °C, Time 2.42e+6 sec	9500 psi @Temperature 73.4 °F, Time 672 hour	Sheet Immersion in Diesel Fuel
	72.05 MPa @Temperature 23.0 °C, Time 1.30e+6 sec	10450 psi @Temperature 73.4 °F, Time 360 hour	Sheet Immersion in Diesel Fuel
Elongation at Break	440 %	440 %	ASTM D412
100% Modulus	0.0104 GPa	1.51 ksi	ASTM D412
300% Modulus	0.0310 GPa	4.50 ksi	ASTM D412
Flexural Stiffness	112.00 MPa	16244 psi
Tear Strength	33.3 kN/m	190 pli	Trouser; ASTM D470
Graves Tear Strength	131 kN/m	750 pli	Die C; ASTM D624
Taber Abrasion, mg/1000 Cycles	50	50	H18, 1000g; ASTM D3389 B
Tensile Set	22 %	22 %	200% elongation; ASTM D412

Thermal Properties	Metric	English	Comments
Melting Point	176 °C	349 °F	Kofler
	177 °C	351 °F	DSC
Glass Transition Temp, Tg	-36.0 °C	-32.8 °F	DSC

Processing Properties	Metric	English	Comments
Zone 1	182 °C	360 °F	Extrusion
Zone 2	188 °C	370 °F	Extrusion
Zone 3	193 °C	379 °F	Extrusion
Zone 4	199 °C	390 °F	Extrusion
Adapter Temperature	204 °C	399 °F	5, Extrusion
Die Temperature	204 °C	399 °F	Zone 1, Extrusion
	204 °C	399 °F	Zone 2, Extrusion
Drying Temperature	104 °C	219 °F
Dry Time	2.00 - 4.00 hour	2.00 - 4.00 hour
Dew Point	-40.0 °C	-40.0 °F

Descriptive Properties	Value	Comments
Volume swell in Diesel Fuel	6.1%	24h, 23°C; ASTM D471

Users viewing this material also viewed the following: