- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyurethane, TP
- Thermoplastic Polyurethane, Elastomer, Ether Grade
- Lubrizol ESTANE® 58863 Ether Based Thermoplastic Polyurethane
Lubrizol ESTANE® 58863 Ether Based Thermoplastic Polyurethane
| Category | Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Ether Grade |
| Manufacturer | Lubrizol (former Noveon) |
| Trade Name | ESTANE® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Lubrizol ESTANE® 58863 Ether Based Thermoplastic Polyurethane.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Features: Good Elasticity – High melt flow for easy processingUses: Extrusion – Wire and cable, general extrusionAvailable in Americas, Europe, Middle East, Africa, India and AsiaInformation provided by Lubrizol.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.12 g/cc | 1.12 g/cc | ASTM D792 |
| Maximum Moisture Content | 0.020 | 0.020 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 82 - 88 @Time 5.00 sec |
82 - 88 @Time 0.00139 hour |
ASTM D2240 |
| Tensile Strength | 40.7 MPa | 5900 psi | ASTM D412 |
| Elongation at Break | 600 % | 600 % | ASTM D412 |
| 100% Modulus | 0.00690 GPa | 1.00 ksi | ASTM D412 |
| 300% Modulus | 0.0110 GPa | 1.60 ksi | ASTM D412 |
| Flexural Modulus | 0.0410 GPa | 5.94 ksi | ASTM D790 |
| Tear Strength | 22.8 kN/m | 130 pli | Trouser; ASTM D470 |
| Graves Tear Strength | 66.6 kN/m | 380 pli | Die C; ASTM D624 |
| Taber Abrasion, mg/1000 Cycles | 4.5 | 4.5 | CS-17, 1000g; ASTM D3389 B |
| Compression Set | 20 % @Temperature 23.0 °C, Time 79200 sec |
20 % @Temperature 73.4 °F, Time 22.0 hour |
|
| 66 % @Temperature 70.0 °C, Time 79200 sec |
66 % @Temperature 158 °F, Time 22.0 hour |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Glass Transition Temp, Tg | -50.0 °C | -58.0 °F | DSC |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Zone 1 | 174 °C | 345 °F | Extrusion |
| Zone 2 | 180 °C | 356 °F | Extrusion |
| Zone 3 | 188 °C | 370 °F | Extrusion |
| Zone 4 | 194 °C | 381 °F | Extrusion |
| Adapter Temperature | 194 °C | 381 °F | 5, Extrusion |
| Die Temperature | 185 °C | 365 °F | Zone 2, Extrusion |
| 191 °C | 376 °F | 6, Zone 1, Extrusion | |
| Drying Temperature | 104 °C | 219 °F | |
| Dry Time | 2.00 - 4.00 hour | 2.00 - 4.00 hour | |
| Dew Point | -40.0 °C | -40.0 °F |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved