Lubrizol ESTANE® 58300 Ether Based Thermoplastic Polyurethane

Category	Polymer , Thermoplastic , Elastomer, TPE , Polyurethane, TP , Thermoplastic Polyurethane, Elastomer, Ether Grade
Manufacturer	Lubrizol (former Noveon)
Trade Name	ESTANE®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Lubrizol ESTANE® 58300 Ether Based Thermoplastic Polyurethane.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Features: Good physical properties, hydrolysis resistance, low temperature performance and abrasion with a wide processing window for extrusion.Uses: Blown and flat die/cast film extrusion, Injection molding and cable jacketing.Information provided by Lubrizol

Physical Properties	Metric	English	Comments
Specific Gravity	1.10 g/cc	1.10 g/cc	ASTM D792
Maximum Moisture Content	0.020	0.020

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	82 @Time 5.00 sec	82 @Time 0.00139 hour	ASTM D2240
Tensile Strength	37.9 MPa	5500 psi	ASTM D412
	28.42 MPa @Temperature 75.0 °C, Time 4.838e+6 sec	4122 psi @Temperature 167 °F, Time 1344 hour	Immersion in Water
	29.18 MPa @Temperature 75.0 °C, Time 2.59e+6 sec	4232 psi @Temperature 167 °F, Time 720 hour	Immersion in Water
	29.94 MPa @Temperature 75.0 °C, Time 1.21e+6 sec	4342 psi @Temperature 167 °F, Time 336 hour	Immersion in Water
	30.69 MPa @Temperature 75.0 °C, Time 605000 sec	4451 psi @Temperature 167 °F, Time 168 hour	Immersion in Water
	37.9 MPa @Temperature 75.0 °C, Time 0.000 sec	5500 psi @Temperature 167 °F, Time 0.000 hour	Immersion in Water
Elongation at Break	700 %	700 %	ASTM D412
100% Modulus	0.00480 GPa	0.696 ksi	ASTM D412
300% Modulus	0.00760 GPa	1.10 ksi	ASTM D412
Tear Strength	22.8 kN/m	130 pli	ASTM D470
Graves Tear Strength	70.1 kN/m	400 pli	Die C; ASTM D624
Taber Abrasion, mg/1000 Cycles	22	22	H18, 1000g; ASTM D3389 B
Tensile Set	11 %	11 %	200% elongation; ASTM D412

Thermal Properties	Metric	English	Comments
Melting Point	125 °C	257 °F	Kofler
	130 °C	266 °F	DSC
Glass Transition Temp, Tg	-50.0 °C	-58.0 °F	DSC

Optical Properties	Metric	English	Comments
Haze	7.0 %	7.0 %	pressed between glass; ASTM D1003

Processing Properties	Metric	English	Comments
Zone 1	166 °C	331 °F	Extrusion
Zone 2	171 °C	340 °F	Extrusion
Zone 3	177 °C	351 °F	Extrusion
Zone 4	182 °C	360 °F	Extrusion
Adapter Temperature	182 °C	360 °F	Extrusion
Die Temperature	182 °C	360 °F	Zone 1, Extrusion
	182 °C	360 °F	Zone 2, Extrusion
Drying Temperature	104 °C	219 °F
Dry Time	2.00 - 4.00 hour	2.00 - 4.00 hour
Dew Point	-40.0 °C	-40.0 °F

Descriptive Properties	Value	Comments
Volume Swell in Water	2%	24h/23°C, ASTM D471

Users viewing this material also viewed the following: