- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyethylene (PE)
- LDPE
- Low Density Polyethylene (LDPE), Extrusion Grade
- Lotte Chemical Titan TITANLENE® LDC800YY Low density polyethylene resin
Lotte Chemical Titan TITANLENE® LDC800YY Low density polyethylene resin
| Category | Polymer , Film , Thermoplastic , Polyethylene (PE) , LDPE , Low Density Polyethylene (LDPE), Extrusion Grade |
| Manufacturer | Lotte Chemical Titan Holding Sdn. Bhd. (Former Titan Chemicals) |
| Trade Name | TITANLENE® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Lotte Chemical Titan TITANLENE® LDC800YY Low density polyethylene resin.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
LDC800YY is a low density polyethylene resin for extrusion coating and is a barefoot grade. LDC800YY meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 2.1 & (c) 2.2.Applications: Coating for all substratesAdditives: BarefootAdvantages: Good drawdown Good heat seal ability and adhesion propertiesInformation provided by Titan Chemicals
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Base Resin Density | 0.920 g/cc | 0.0332 lb/in³ | ASTM D1505 |
| Water Vapor Transmission | 18.0 g/m²/day | 1.16 g/100 in²/day | 90%RH, 37.8°C, 25µ; ASTM F372 |
| Oxygen Transmission | 220 cc-mm/m²-24hr-atm | 559 cc-mil/100 in²-24hr-atm | ASTM D3985 |
| Base Resin Melt Index | 3.5 g/10 min | 3.5 g/10 min | ASTM D1238 |
| Neck In | 8.00 cm | 3.15 in | Constant output 50m/min, 295°C; Internal Method |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 87.0 °C | 189 °F | resin; ASTM D1525 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved