Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

LG Chemical LUMID GP1300A(W) PA6, High Viscosity

Category Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, Unreinforced
Manufacturer LG Chemical
Trade Name LUMID
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF LG Chemical LUMID GP1300A(W) PA6, High Viscosity.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Feature: Injection Molding, PA6, High ViscosityApplication: Automotive PartsCAS No. 25038-54-4Information provided by LG Chemical
Physical Properties Metric English Comments
Specific Gravity 1.13 g/cc
1.13 g/cc
ASTM D792
Water Absorption 1.7 %
1.7 %
ASTM D570
Linear Mold Shrinkage, Flow 0.010 - 0.014 cm/cm

@Thickness 3.20 mm
0.010 - 0.014 in/in

@Thickness 0.126 in
ASTM D955
Mechanical Properties Metric English Comments
Hardness, Rockwell R 120
120
ASTM D785
Tensile Strength, Yield 76.5 MPa

@Thickness 3.20 mm
11100 psi

@Thickness 0.126 in
50mm/min; ASTM D638
Elongation at Break 170 %

@Thickness 3.20 mm
170 %

@Thickness 0.126 in
50mm/min; ASTM D638
Flexural Yield Strength 108 MPa

@Thickness 3.20 mm
15600 psi

@Thickness 0.126 in
2.8mm/min; ASTM D790
Flexural Modulus 2.55 GPa

@Thickness 3.20 mm
370 ksi

@Thickness 0.126 in
2.8mm/min; ASTM D790
Izod Impact, Notched 0.490 J/cm

@Thickness 6.40 mm,
Temperature 23.0 °C
0.918 ft-lb/in

@Thickness 0.252 in,
Temperature 73.4 °F
ASTM D256
Thermal Properties Metric English Comments
Melting Point 220 °C
428 °F
ASTM D3418
Deflection Temperature at 0.46 MPa (66 psi) 160 °C

@Thickness 6.40 mm
320 °F

@Thickness 0.252 in
Unannealed; ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 60.0 °C

@Thickness 6.40 mm
140 °F

@Thickness 0.252 in
Unannealed; ASTM D648
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+15 ohm-cm
1.00e+15 ohm-cm
ASTM D257
Dielectric Constant 3.5

@Frequency 1.00e+6 Hz
3.5

@Frequency 1.00e+6 Hz
ASTM D150
Dielectric Strength 19.0 kV/mm

@Thickness 1.00 mm
483 kV/in

@Thickness 0.0394 in
ASTM D149
Arc Resistance 195 sec
195 sec
ASTM D495
Processing Properties Metric English Comments
Rear Barrel Temperature 255 - 265 °C
491 - 509 °F
Injection Molding
Middle Barrel Temperature 230 - 260 °C
446 - 500 °F
Injection Molding
Front Barrel Temperature 240 - 270 °C
464 - 518 °F
Injection Molding
Nozzle Temperature 240 - 270 °C
464 - 518 °F
Injection Molding
Melt Temperature 240 - 270 °C
464 - 518 °F
Injection Molding
Mold Temperature 60.0 - 80.0 °C
140 - 176 °F
Injection Molding
Drying Temperature 80.0 - 100 °C
176 - 212 °F
Injection Molding
Dry Time 4.00 - 5.00 hour
4.00 - 5.00 hour
Injection Molding
Copyright © lookpolymers.com All Rights Reserved