- HOME
- POLYMER SEARCH
- Thermoplastic
- Styrene-Butadiene
- Styrene/Butadiene/Styrene (SBS)
- Kraton® D1153 E (SBS) Liner Block Copolymer
Kraton® D1153 E (SBS) Liner Block Copolymer
| Category | Polymer , Thermoplastic , Styrene-Butadiene , Styrene/Butadiene/Styrene (SBS) |
| Manufacturer | Kraton |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Kraton® D1153 E (SBS) Liner Block Copolymer.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Description: Kraton D1153 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature: Kraton D1153 ES - supplied as porous pellets dusted with amorphous silicaRegion: Asia Pacific, Europe, Japan, North America, and South America Uses: Kraton D1153 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings.Applications: Adhesives, Sealant and Coatings; Bitumen Modification; Compounding and Personal Hygiene; Footwear; Impact Modification; Medical; Packaging and Polymod; Personal Care; and Roads and RoofingInformation provided by Kraton®
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 0.940 g/cc | 0.940 g/cc | ISO 2781 |
| Bulk Density | 0.400 g/cc | 0.0145 lb/in³ | ASTM D 1895 method B |
| Volatiles | <= 0.30 % | <= 0.30 % | KM 04 |
| Viscosity | 1400 - 1900 cP | 1400 - 1900 cP | 25% Toluene Solution at 25°C; KM 06 |
| Molecular Weight | 123000 g/mol | 123000 g/mol | Apparent, Triblock; BMS 0490 |
| Melt Flow | 3.0 g/10 min @Load 5.00 kg, Temperature 200 °C |
3.0 g/10 min @Load 11.0 lb, Temperature 392 °F |
ISO 1133 |
| Ash | 0.10 - 0.40 % | 0.10 - 0.40 % | ES; ISO 247 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 70 @Time 15.0 sec |
70 @Time 0.00417 hour |
Measured on compression molded slabs; ASTM D2240 |
| Tensile Strength | 28.0 MPa | 4060 psi | measured on films cast from a solution in toluene; ISO 37 |
| Elongation at Break | 800 % | 800 % | Measured on films cast from a solution in toluene; ISO 37 |
| 300% Modulus | 0.00290 GPa | 0.421 ksi | Measured on films cast from a solution in toluene; ISO 37 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Content | Antioxidant | >0.1%, KM 08 |
| Polystyrene | 28.5-30.5%, KM 03 | |
| Total Extractables | <1.0%, KM 05 | |
| Triblock Content | 95 percent | BMS 0490 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved