POLYMER SEARCH

Kingfa PBT-R0N Flame Retardant PBT

Category	Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT) , Polybutylene Terephthalate (PBT), Flame Retardant
Manufacturer	Kingfa Sci. & Tech. Co.
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Kingfa PBT-R0N Flame Retardant PBT.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Features:Flame retardantGood chemical resistanceOutstanding surfaceEasy processingHigh impactApplications:Injection moldingConnectors, terminal blocksRelay, switchBobbinsPlugsE & E partsInformation Provided by Kingfa Sci. & Tech. Co., Ltd.

Physical Properties	Metric	English	Comments
Specific Gravity	1.43 g/cc @Temperature 23.0 Â°C	1.43 g/cc @Temperature 73.4 Â°F	ASTM D792
Water Absorption	0.060 % @Temperature 23.0 Â°C, Time 86400 sec	0.060 % @Temperature 73.4 Â°F, Time 24.0 hour	ASTM D570
Linear Mold Shrinkage	0.012 - 0.014 cm/cm @Temperature 23.0 Â°C	0.012 - 0.014 in/in @Temperature 73.4 Â°F	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	118	118	ASTM D785
Tensile Strength at Break	50.0 MPa	7250 psi	10mm/min; ASTM D638
Elongation at Break	25 %	25 %	10mm/min; ASTM D638
Flexural Strength	65.0 MPa	9430 psi	2mm/min; ASTM D790
Flexural Modulus	2.50 GPa	363 ksi	2mm/min; ASTM D790
Izod Impact, Notched	0.650 J/cm @Thickness 3.20 mm, Temperature 23.0 Â°C	1.22 ft-lb/in @Thickness 0.126 in, Temperature 73.4 Â°F	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	162 Â°C @Thickness 6.40 mm	324 Â°F @Thickness 0.252 in	ASTM D648
Deflection Temperature at 1.8 MPa (264 psi)	63.0 Â°C @Thickness 6.40 mm	145 Â°F @Thickness 0.252 in	ASTM D648
Flammability, UL94	V-0 @Thickness 0.750 mm	V-0 @Thickness 0.0295 in
	V-0 @Thickness 3.00 mm	V-0 @Thickness 0.118 in

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+16 ohm-cm	1.00e+16 ohm-cm	ASTM D257

Processing Properties	Metric	English	Comments
Processing Temperature	<= 270 Â°C	<= 518 Â°F
Rear Barrel Temperature	220 - 240 Â°C	428 - 464 Â°F	Start Point: 230Â°C
Middle Barrel Temperature	230 - 250 Â°C	446 - 482 Â°F	Start Point: 240Â°C
Front Barrel Temperature	240 - 260 Â°C	464 - 500 Â°F	Start Point: 250Â°C
Melt Temperature	240 - 260 Â°C	464 - 500 Â°F	Start Point: 250Â°C
Mold Temperature	50.0 - 80.0 Â°C	122 - 176 Â°F	Start Point: 60Â°C
Drying Temperature	120 - 140 Â°C @Time 10800 - 18000 sec	248 - 284 Â°F @Time 3.00 - 5.00 hour	Pre-dry

Descriptive Properties	Value	Comments
Injection Speed	Moderate to High

Users viewing this material also viewed the following: