Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Kingfa JH720 G15 15% Glass Fiber Reinforced PC

Category Polymer , Thermoplastic , Polycarbonate (PC) , Polycarbonate, 20% Glass Filled
Manufacturer Kingfa Sci. & Tech. Co.
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Kingfa JH720 G15 15% Glass Fiber Reinforced PC.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Features:Excellent balance propertiesHigh mechanical propertiesHigh stiffnessGood size stabilityGood surfaceApplications:Imaging equipment shellOA body frameElectrical equipmentComputer plug partsInformation Provided by Kingfa Sci. & Tech. Co., Ltd.
Physical Properties Metric English Comments
Specific Gravity 1.26 g/cc

@Temperature 23.0 °C
1.26 g/cc

@Temperature 73.4 °F
ASTM D792
Linear Mold Shrinkage 0.0030 - 0.0050 cm/cm

@Temperature 23.0 °C
0.0030 - 0.0050 in/in

@Temperature 73.4 °F
ASTM D955
Mechanical Properties Metric English Comments
Hardness, Rockwell M 84
84
ASTM D785
Tensile Strength at Break 85.0 MPa
12300 psi
10mm/min; ASTM D638
Elongation at Break 8.0 %
8.0 %
10mm/min; ASTM D638
Flexural Strength 129 MPa
18700 psi
2mm/min; ASTM D790
Flexural Modulus 5.40 GPa
783 ksi
2mm/min; ASTM D790
Izod Impact, Notched 1.10 J/cm

@Thickness 3.20 mm,
Temperature 23.0 °C
2.06 ft-lb/in

@Thickness 0.126 in,
Temperature 73.4 °F
ASTM D256
Izod Impact, Unnotched 5.80 J/cm

@Thickness 3.20 mm,
Temperature 23.0 °C
10.9 ft-lb/in

@Thickness 0.126 in,
Temperature 73.4 °F
ASTM D256
Thermal Properties Metric English Comments
Deflection Temperature at 0.46 MPa (66 psi) 142 °C

@Thickness 3.20 mm
288 °F

@Thickness 0.126 in
ASTM D648
Deflection Temperature at 1.8 MPa (264 psi) 138 °C

@Thickness 3.20 mm
280 °F

@Thickness 0.126 in
ASTM D648
Flammability, UL94 HB

@Thickness 1.60 mm
HB

@Thickness 0.0630 in
HB

@Thickness 3.00 mm
HB

@Thickness 0.118 in
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+16 ohm-cm
1.00e+16 ohm-cm
ASTM D257
Surface Resistance 1.00e+15 ohm
1.00e+15 ohm
ASTM D257
Dielectric Strength 22.0 kV/mm
559 kV/in
1.6mm; ASTM D149
Processing Properties Metric English Comments
Processing Temperature <= 295 °C
<= 563 °F
Rear Barrel Temperature 250 - 275 °C
482 - 527 °F
Start Point: 260°C
Middle Barrel Temperature 265 - 285 °C
509 - 545 °F
Start Point: 270°C
Front Barrel Temperature 270 - 290 °C
518 - 554 °F
Start Point: 275°C
Melt Temperature 255 - 280 °C
491 - 536 °F
Start Point: 260°C
Mold Temperature 90.0 - 140 °C
194 - 284 °F
Start Point: 100°C
Drying Temperature 110 - 120 °C

@Time 10800 - 14400 sec
230 - 248 °F

@Time 3.00 - 4.00 hour
Pre-dry
Back Pressure 0.300 - 1.00 MPa
43.5 - 145 psi
Descriptive Properties Value Comments
Glass Fiber Content (%) 15
Injection Speed 60-90%
Copyright © lookpolymers.com All Rights Reserved