Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Ineos ABS Triax® 1120 ABS + Polyamide Blend (DAM)

Category Polymer , Thermoplastic , ABS Polymer , Acrylonitrile Butadiene Styrene (ABS)/Nylon Blend , Nylon
Manufacturer Ineos ABS
Trade Name Triax®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Ineos ABS Triax® 1120 ABS + Polyamide Blend (DAM).pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Key Features:UnfilledPlatableHigh impact or high impact modifiedSuitable processing methods:Injection moldingFilm extrusionBlow molding
Physical Properties Metric English Comments
Density 0.900 g/cc
0.0325 lb/in³
Melt
1.06 g/cc
0.0383 lb/in³
Water Absorption 6.0 %
6.0 %
Moisture Absorption at Equilibrium 1.7 %
1.7 %
23°C/50% R.H.
Linear Mold Shrinkage, Flow 0.0070 cm/cm
0.0070 in/in
Linear Mold Shrinkage, Transverse 0.0080 cm/cm
0.0080 in/in
Melt Flow 7.0 g/10 min

@Load 5.00 kg,
Temperature 260 °C
7.0 g/10 min

@Load 11.0 lb,
Temperature 500 °F
Mechanical Properties Metric English Comments
Tensile Strength, Yield 40.0 MPa
5800 psi
Elongation at Break >= 50 %
>= 50 %
Nominal
Elongation at Yield 3.2 %
3.2 %
Tensile Modulus 1.90 GPa
276 ksi
Charpy Impact Unnotched NB
NB
NB

@Temperature -30.0 °C
NB

@Temperature -22.0 °F
Charpy Impact, Notched 7.40 J/cm²
35.2 ft-lb/in²
1.60 J/cm²

@Temperature -30.0 °C
7.61 ft-lb/in²

@Temperature -22.0 °F
Puncture Energy 40.0 J
29.5 ft-lb
Puncture energy +23°C
40.0 J
29.5 ft-lb
Puncture energy -30°C
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 105 µm/m-°C

@Temperature 20.0 °C
58.3 µin/in-°F

@Temperature 68.0 °F
CTE, linear, Transverse to Flow 115 µm/m-°C

@Temperature 20.0 °C
63.9 µin/in-°F

@Temperature 68.0 °F
Specific Heat Capacity 2.20 J/g-°C
0.526 BTU/lb-°F
Melt
Thermal Conductivity 0.145 W/m-K
1.01 BTU-in/hr-ft²-°F
Melt
Deflection Temperature at 0.46 MPa (66 psi) 91.0 °C
196 °F
Deflection Temperature at 1.8 MPa (264 psi) 68.0 °C
154 °F
Vicat Softening Point 102 °C
216 °F
50°C/h 50N
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+12 ohm-cm
1.00e+12 ohm-cm
Surface Resistance 1.00e+14 ohm
1.00e+14 ohm
Dielectric Constant 3.6

@Frequency 1e+6 Hz
3.6

@Frequency 1e+6 Hz
4.3

@Frequency 100 Hz
4.3

@Frequency 100 Hz
Dielectric Strength 34.0 kV/mm
864 kV/in
Dissipation Factor 0.029

@Frequency 100 Hz
0.029

@Frequency 100 Hz
0.030

@Frequency 1e+6 Hz
0.030

@Frequency 1e+6 Hz
Comparative Tracking Index 600 V
600 V
Processing Properties Metric English Comments
Melt Temperature 260 °C
500 °F
Injection Molding
Mold Temperature 80.0 °C
176 °F
Injection Molding
Ejection Temperature 90.0 °C
194 °F
Injection Velocity 40.0 mm/sec
1.57 in/sec
Descriptive Properties Value Comments
Effective thermal diffusivity 0.732E-7 m²/s
Melt
Copyright © lookpolymers.com All Rights Reserved