- HOME
- POLYMER SEARCH
- Oxide
- Aluminum Oxide
- ICE Mullite, 3Al2O3-SiO2
ICE Mullite, 3Al2O3-SiO2
| Category | Ceramic , Oxide , Aluminum Oxide |
| Manufacturer | International Ceramic Engineering |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ICE Mullite, 3Al2O3-SiO2.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Data provided by the manufacturer, International Ceramic Engineering.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Water Absorption | 0.00 % | 0.00 % |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Mohs | 8.0 | 8.0 | |
| Tensile Strength, Ultimate | 100 MPa | 14500 psi | |
| Flexural Strength | 100 MPa | 14500 psi | |
| Compressive Strength | 1000 MPa | 145000 psi |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 5.30 µm/m-°C @Temperature 25.0 - 600 °C |
2.94 µin/in-°F @Temperature 77.0 - 1110 °F |
|
| Thermal Conductivity | 3.50 W/m-K | 24.3 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 1710 °C | 3110 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Tan |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Cycoloy® C1204HF PC+ABS
- Global SU-1018 Low Density Polyethylene, Injection Molding Grade (discontinued **)
- Kingfa JE2-R2 ABS/PBT Alloy
- UBE UBESTA® 3030U Nylon 12 (After Nitric Acid (10%) for 500 hours)
- Formosa Plastics Formolene® 2575N injection Molded Polypropylene
- Tra-Con Tra-Bond 342-3.5 Room Temperature Cure Epoxy Adhesive
- Cytec Thornel® P-55S 2K Carbon Fiber, Pitch Precursor
- Dow TUFLIN™ HS-7066 NT 7 Linear Low Density Polyethylene Resin
- Vyncolit Neopreg Kinel® SK60 L8G Glass Fiber Reinforced Molding Compound
Copyright © lookpolymers.com All Rights Reserved