- HOME
- POLYMER SEARCH
- Thermoset
- Phenolic
- Hippe PF WV 304 Wood veneer Reinforced Phenolic Resin - Sheet
Hippe PF WV 304 Wood veneer Reinforced Phenolic Resin - Sheet
| Category | Polymer , Thermoset , Phenolic |
| Manufacturer | Erhard Hippe KG |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Hippe PF WV 304 Wood veneer Reinforced Phenolic Resin - Sheet.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Parallel plied. Used in mechanical and electrical applications.Information provided by Hippe.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.30 - 1.40 g/cc | 1.30 - 1.40 g/cc | IEC 1212-2 8.1 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength | >= 120 MPa | >= 17400 psi | IEC 1212-2 5.7 |
| Flexural Strength | >= 170 MPa | >= 24700 psi | Perpendicular to laminations; IEC 1212-2 5.1 |
| Flexural Modulus | >= 18.0 GPa | >= 2610 ksi | IEC 1212-2 5.2 |
| Compressive Strength | >= 80.0 MPa | >= 11600 psi | Perpendicular to laminations; IEC 1212-2 5.3 |
| Shear Strength | >= 15.0 MPa | >= 2180 psi | Parallel to laminations; IEC 1212-2 5.6 |
| Charpy Impact Unnotched | >= 2.50 J/cm² | >= 11.9 ft-lb/in² | Parallel to laminations; IEC 1212-2 5.5.2 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Insulation Resistance | >= 1.00e+8 ohm | >= 1.00e+8 ohm | After immersion in water; IEC 1212-2 6.3 |
| Dielectric Breakdown | >= 25000 V @Temperature 90.0 °C |
>= 25000 V @Temperature 194 °F |
In oil, parallel to laminations; IEC 1212-2 6.2 |
| Dissipation Factor | <= 0.10 @Frequency 48.0 - 62.0 Hz |
<= 0.10 @Frequency 48.0 - 62.0 Hz |
IEC 1212-2 6.2 |
| Comparative Tracking Index | >= 100 V | >= 100 V | IEC 1212-2 6.4 |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Thermal Endurance | 120 T.I. | IEC 1212-2 7.1 |
Users viewing this material also viewed the following:
- Plastcom SLOVASTER® B GF 20 FRK 3 Polybutylene Terephthalate, 20% Chemically Coupled Glass Fiber, Red Phosphorus Flame Retardant
- Chevron Phillips 7109D Linear low density polyethylene blown film resin (discontinued **)
- Polimeri Europa SINKRAL C433/M3 ABS, Heat Stabilized (discontinued **)
- Lubriplate AERO Lithium Based Grease For Special Applications / Conditions
- Lucas-Milhaupt Silvaloy® 50N Brazing Alloy
- SABIC Innovative Plastics Noryl GTX GTX977 PPE+PA66 (Europe-Africa-Middle East)
- UBE UBESTA® 3030U Nylon 12 (After Hydrochloric Acid (10%) for 500 hours)
- Asahi Kasei Tenac® LA543 Homopolymer Acetal Resin
- Gouda Vuurvast LP 85 KP Dense Refractory Brick
Copyright © lookpolymers.com All Rights Reserved