Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Gwent Electronic Materials C2030922D1 Silver Ink

Category Fluid , Metal , Other Engineering Material , Ceramic/Metallic Coating
Manufacturer Gwent Electronic Materials Ltd.
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Gwent Electronic Materials C2030922D1 Silver Ink.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Silver Ink C2030922D1 is a grey ink with a pine smell at a ready to use viscosity suitable for firing on glass and ceramic to form conductive tracks. The ink should be gently stirred before use avoiding introduction of air bubbles.Silver Ink has a low resistance ink designed for use as the heating bars and tracks on automobile backlights and other circuits on glass. It has a dark back color when printed and fired on float side of glass. It can be printed onto IR or UV black enamels. Screen Printing Equipment: semi-automatic, automaticScreen Types: stainless steel, polyester, mesh 156-325 tpiSubstrate: GlassInformation provided by Gwent Electronic Materials Ltd.
Physical Properties Metric English Comments
Solids Content 84 - 86 %

@Temperature 700 °C
84 - 86 %

@Temperature 1290 °F
Viscosity 3000 - 5500 cP

@Shear Rate 230 1/s,
Temperature 25.0 °C
3000 - 5500 cP

@Shear Rate 230 1/s,
Temperature 77.0 °F
Haake VT 550 PK1.1°
Storage Temperature 20.0 °C
68.0 °F
sealed container
Electrical Properties Metric English Comments
Surface Resistivity per Square 0.015 - 0.020 ohm

@Thickness 0.0250 mm
0.015 - 0.020 ohm

@Thickness 0.000984 in
Printed onto 125µm PET film
0.030 - 0.045 ohm

@Thickness 0.0100 mm
0.030 - 0.045 ohm

@Thickness 0.000394 in
Printed onto 125µm PET film
Processing Properties Metric English Comments
Sintering Temperature 550 - 750 °C
1020 - 1380 °F
Cure Time 15.0 min

@Temperature 150 °C
0.250 hour

@Temperature 302 °F
Shelf Life 6.00 Month
6.00 Month
Descriptive Properties Value Comments
Bending Test Ink survived 3 cycles
Printed onto 125µm PET film, Failure at resistance 10 times the initial value using 2kg weight.
Coverage cm2/g 110
Using a 230 mesh stainless steel screen
Double Curing Aging factor of -0.7% after double curing at 150C for 15 mins.
Printed onto 125µm PET film
Hot Water Test Aging factor of -0.2% after boiling for 1 hr.
Printed onto 125µm PET film
Copyright © lookpolymers.com All Rights Reserved