Guarniflon PTFE G415 Polytetrafluoroethylene 25% Soft Carbon

Category	Polymer , Thermoplastic , Fluoropolymer , PTFE , Polytetrafluoroethylene (PTFE), Conductive Carbon Filled
Manufacturer	Guarniflon
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Guarniflon PTFE G415 Polytetrafluoroethylene 25% Soft Carbon.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

PTFE G Standard Compound with carbon..Properties: Good thermal and electrical conductivity. Good resistance to deformation. Excellent resistance to load with low coefficient of friction and high wear strength. Enhanced chemical resistanceApplications: Bearings for high speed and when fast dissipation of electric charges is needed. Elastic bands for unlubricated compressors. Valve seats.Information provided by GuarniflonÂ®

Physical Properties	Metric	English	Comments
Density	2.04 - 2.10 g/cc	0.0737 - 0.0759 lb/inÂ³	extruded; ASTM D792
	2.05 - 2.11 g/cc	0.0741 - 0.0762 lb/inÂ³	molded; ASTM D792
Deformation	2.5 - 4.0 % @Pressure 13.7 MPa, Time 86400 sec	2.5 - 4.0 % @Pressure 1990 psi, Time 24.0 hour	after 24hr relaxation; ASTM D621
	4.5 - 6.5 % @Pressure 13.7 MPa, Time 86400 sec	4.5 - 6.5 % @Pressure 1990 psi, Time 24.0 hour	ASTM D621

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	60 - 65	60 - 65	molded; ASTM D2240
	60 - 65	60 - 65	extruded; ASTM D2240
Tensile Strength	>= 14.0 MPa	>= 2030 psi	extruded; ASTM D4894, ASTM D4745
	15.0 - 20.0 MPa	2180 - 2900 psi	molded; ASTM D4894, ASTM D4745
Elongation at Break	>= 100 %	>= 100 %	extruded; ASTM D4745
	150 - 200 %	150 - 200 %	molded; ASTM D4894
Compressive Yield Strength	7.00 - 9.00 MPa @Strain 1.00 %	1020 - 1310 psi @Strain 1.00 %	ASTM D695
Coefficient of Friction, Dynamic	0.13	0.13	ASTM D1894
K (wear) Factor	20.0 - 30.0 x 10^-8 mmÂ³/N-M	9.93 - 14.9 x 10^-10 inÂ³-min/ft-lb-hr	at PV 100; ASTM D3702

Thermal Properties	Metric	English	Comments
CTE, linear	120 - 130 Âµm/m-Â°C	66.7 - 72.2 Âµin/in-Â°F	ASTM D696
Maximum Service Temperature, Air	260 Â°C	500 Â°F
Minimum Service Temperature, Air	-200 Â°C	-328 Â°F

Users viewing this material also viewed the following: