- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Fujipoly Industries Zebra® 1002 Carbon Sponge Self-Supported Connectors
Fujipoly Industries Zebra® 1002 Carbon Sponge Self-Supported Connectors
| Category | Polymer , Thermoset , Silicone |
| Manufacturer | Fujipoly Industries |
| Trade Name | Zebra® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Fujipoly Industries Zebra® 1002 Carbon Sponge Self-Supported Connectors.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Fujipoly Carbon Zebra Connectors and Low Temperature Carbon Zebra Connectors consist of alternating layers of conductive carbon filled and non-conductive silicone rubber. Contact density of the carbon Zebra Connector is grater than the contact pad density of either LCD or PCB. At least one conductive layer will connect when the two mating surfaces are aligned and compressed. The insulation layer will insure isolation from adjacent circuits.Information provided by Fujipoly Industries
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 10 | 10 | Support Sponge |
| 25 | 25 | Support Rubber | |
| 55 | 55 | Insulating Layer | |
| 73 | 73 | Conductive Layer | |
| Tensile Strength, Yield | 2.90 MPa | 421 psi | Support Sponge |
| 5.90 MPa | 856 psi | Conductive Layer | |
| 6.90 MPa | 1000 psi | Support Rubber | |
| 6.90 MPa | 1000 psi | Insulating Layer | |
| Elongation at Yield | 100 % | 100 % | Support Sponge |
| 100 % | 100 % | Conductive Layer | |
| 250 % | 250 % | Support Rubber | |
| 250 % | 250 % | Insulating Layer | |
| Tear Strength | 5.00 kN/m | 28.5 pli | Support Sponge |
| 7.00 kN/m | 39.9 pli | Conductive Layer | |
| 10.0 kN/m | 57.1 pli | Support Rubber | |
| 10.0 kN/m | 57.1 pli | Insulating Layer |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 125 °C | 257 °F | |
| Minimum Service Temperature, Air | -55.0 °C | -67.0 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 5.0 ohm-cm | 5.0 ohm-cm | Conductive Layer |
| 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | Support Sponge | |
| 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | Support Rubber | |
| 1.00e+14 ohm-cm | 1.00e+14 ohm-cm | Insulating Layer | |
| Surface Resistance | 1.00e+12 ohm | 1.00e+12 ohm | Between Layers |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Black | Conductive Layer |
| Light Blue | Support Rubber | |
| Off-White | Insulating Layer | |
| Pink | Support Sponge | |
| Continuity Resistance | 1000 ohms | |
| Current Carrying Capacity | 50 mA | 0.90mm by 0.90mm Pad |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved