- HOME
- POLYMER SEARCH
- Thermoplastic
- Polypropylene (PP)
- Fiberfil® J-60/15/MI/20 Polypropylene Homopolymer, 35% Glass/mica Reinforced
Fiberfil® J-60/15/MI/20 Polypropylene Homopolymer, 35% Glass/mica Reinforced
| Category | Polymer , Thermoplastic , Polypropylene (PP) |
| Manufacturer | FiberFil |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Fiberfil® J-60/15/MI/20 Polypropylene Homopolymer, 35% Glass/mica Reinforced.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by FIBERFIL Engineered Plastics
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.18 g/cc | 1.18 g/cc | ASTM D792 |
| Water Absorption | 0.040 % | 0.040 % | 24 hr; ASTM D570 |
| Linear Mold Shrinkage | 0.020 - 0.030 cm/cm @Thickness 3.17 mm |
0.020 - 0.030 in/in @Thickness 0.125 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 41.0 MPa | 5950 psi | ISO 527 |
| Elongation at Yield | 2.5 % | 2.5 % | ISO 527 |
| Flexural Strength | 60.0 MPa | 8700 psi | ISO 178 |
| Flexural Modulus | 5.00 GPa | 725 ksi | ISO 178 |
| Izod Impact, Notched (ISO) | 3.20 kJ/m² @Thickness 3.17 mm |
1.52 ft-lb/in² @Thickness 0.125 in |
ISO 180/1A |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Deflection Temperature at 0.46 MPa (66 psi) | 154 °C | 310 °F | ISO 75 |
| Deflection Temperature at 1.8 MPa (264 psi) | 146 °C | 295 °F | ISO 75 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Rear Barrel Temperature | 199 - 210 °C | 390 - 410 °F | |
| Middle Barrel Temperature | 204 - 227 °C | 400 - 440 °F | |
| Front Barrel Temperature | 182 - 199 °C | 360 - 390 °F | |
| Nozzle Temperature | 182 - 193 °C | 360 - 380 °F | |
| Melt Temperature | 199 - 232 °C | 390 - 450 °F | |
| Mold Temperature | 32.2 - 71.1 °C | 90.0 - 160 °F | |
| Drying Temperature | 76.7 °C | 170 °F | Drying not normally required |
| Dry Time | 2 hour | 2 hour | Drying not normally required |
| Moisture Content | <= 0.20 % | <= 0.20 % | recommended for molding |
| Back Pressure | 0.000 - 0.689 MPa | 0.000 - 100 psi |
Users viewing this material also viewed the following:
- Hyosung Topilene R701 PP
- Kraton® FG1924 G (SEBS) Linear Block Copolymer
- LG Chemical LUPOL HM3102A PP+MF10%, High Impact
- Henkel Hysol PL 777-1FR Film Adhesive
- Techmer ES HiFill® PBT 620
- Samsung Cheil Industries Starex® VE-1801 HIPS, Unreinforced FR
- The NanoSteel® Company SHS 9172 TWAS Steel Alloy, Cored Wire
- Trimay® Wear Plate TWP170 Flux Cored Weld Wire & Electrode
- Barlog Plastics KEBAFORM C 130 HD POM Copolymer unreinforced, improved fuel resistance
Copyright © lookpolymers.com All Rights Reserved