Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

ExxonMobil 320 Mobil DTE PM Series

Category Fluid , Lubricant
Manufacturer
Trade Name
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF ExxonMobil 320 Mobil DTE PM Series.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Mobil DTE PM Series products are high-quality, high-performance lubricants specifically designed for demanding industrial paper machine circulating systems. They are engineered to provide exceptional lubrication qualities while protecting system components from rust and corrosion. This is particularly important in the wet-end where water and chemical contaminants can enter the lubrication system. The Mobil DTE PM Series oils are formulated to provide maximum protection of gears and bearings operating under severe conditions. They exhibit good viscosity characteristics allowing reduced start-up to production times while maintaining excellent viscosity characteristics at high temperatures. The DTE PM Series oils provide excellent resistance to oxidation and thermal degradation, exceptional protection against rust and corrosion, and a high level of anti-wear performance. Mobil DTE PM Series oils are formulated with select high-quality base oils and a proprietary advanced technology additive system carefully balanced to attain high performance standards. These fluids permit the use of high steam pressures, temperatures and machine speeds common in high output paper machines. Their outstanding demulsibility and filterability assure excellent performance in the presence of water and the ability to retain effective filtration even at very fine filtration levels. They readily separate water and retain their colour characteristics for extended periods of operation.Lubrication of industrial paper machine circulating systems; Application involving circulation systems operating over a wide temperature range; Systems that must be started and brought on line quickly; Circulation systems lubricating gears and bearings
Physical Properties Metric English Comments
Specific Gravity 0.892 g/cc
0.892 g/cc
15.6°C; ASTM D1298
Viscosity Measurement >= 95
>= 95
Index; ASTM D2270
Kinematic Viscosity at 40°C (104°F) 320 cSt
320 cSt
ASTM D445
Kinematic Viscosity at 100°C (212°F) 25.4 cSt
25.4 cSt
ASTM D445
Thermal Properties Metric English Comments
Pour Point -6.00 °C
21.2 °F
ASTM D97
Flash Point 250 °C
482 °F
ASTM D92
Descriptive Properties Value Comments
Copper Strip Corrosion 1A
3 hrs @ 100°C
Demulsibility Time (min) 15
to 3 mL emulsion @ 82°C
Foam Sequence I, ASTM D1088 10/0
Foam Sequence II, ASTM D893 30/0
Foam Sequence III, ASTM D893 10/0
FZG 4-Square Load Support, DIN 51354, Fail Stage 12
Rust Prevention, Distilled Water pass
ASTM D665A
Rust Prevention, Synthetic Sea Water pass
ASTM D665B
Copyright © lookpolymers.com All Rights Reserved