Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

ExxonMobil 20W-50 Exxon Aviation Oil Elite

Category Fluid , Lubricant
Manufacturer
Trade Name
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF ExxonMobil 20W-50 Exxon Aviation Oil Elite.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Aviation Oil 20W-50 is a premium quality, semi-synthetic, ashless-dispersant aviation piston engine oil. It is formulated from select, highly refined mineral base oils, a polyalphaolefin synthetic base oil, and ashless performance additives providing outstanding engine cleanliness, wear protection, and corrosion protection. Aviation Oil 20W-50 is designed to satisfy the requirements of all opposed piston engine manufacturer’s requirements under a wide range of climatic conditions.Exxon Aviation Oil 20W-50 is U.S. Military approved under SAE J1899, which replaced MIL-L-22851D and is listed in the U.S. Military Qualified Products List QPL-1899. It is approved by and included in the Qualified Products Lists of Teledyne Continental, and Textron Lycoming and it is designed to satisfy the requirements of all opposed piston engine manufacturers. It provides an alternate means of compliance with FAA AD 80-04-03-R2 par.b.1. New or newly overhauled aircraft engines should be broken in according to the engine builder’s recommended procedure. Many engine manufacturers advise running in on straight mineral oils for the first 25 to 50 hours of operation. In all cases, however, the engine manufacturers recommendations should be followed, since the run in procedure can vary from engine to engine. Aviation Oil is compatible with non-dispersant mineral oils as well as other ashless-dispersant oils that meet the requirements of MIL-L-22851D/SAE J1899. It can also be used in high-time engines that have previously used a straight mineral oil. In this case it is advisable to carry out the oil-screen inspection recommended by the engine manufacturer.
Physical Properties Metric English Comments
Density 0.877 g/cc

@Temperature 15.6 °C
0.0317 lb/in³

@Temperature 60.1 °F
ASTM D4052
API Gravity 29.7 °
29.7 °
Viscosity 5.4 cP

@Temperature 150 °C
5.4 cP

@Temperature 302 °F
High Temperature High Shear (HTHS); ASTM D4683
7060 cP

@Temperature -15.0 °C
7060 cP

@Temperature 5.00 °F
Cold Cranking Simulator (CCS); ASTM D5293
Viscosity Measurement 130
130
Index; ASTM D2270
Kinematic Viscosity at 40°C (104°F) 180 cSt
180 cSt
ASTM D445
Kinematic Viscosity at 100°C (212°F) 20.2 cSt
20.2 cSt
ASTM D445
Ash 0.00 %
0.00 %
SAE J1747
Thermal Properties Metric English Comments
Pour Point -27.0 °C
-16.6 °F
ASTM D97
Flash Point 258 °C
496 °F
ASTM D92
Component Elements Properties Metric English Comments
Sulfur, S 0.40 %
0.40 %
Chemical Properties Metric English Comments
Total Acid Number 0.31
0.31
mgKOH/g; ASTM D664
Descriptive Properties Value Comments
Copper Strip Corrosion, ASTM D130 1A
3 hrs @ 100°C
2C
3 hrs @ 204°C
Foam Sequence I, ASTM D1141 0/0
Foam Sequence II, ASTM D893 0/0
Foam Sequence III, ASTM D893 0/0
Copyright © lookpolymers.com All Rights Reserved