Songhan Plastic Technology Co.,Ltd.

Evonik Corporation Plexiglas® 99530 Crystal Clear Elastomer Based Film

Category Polymer , Film , Thermoplastic , Acrylic (PMMA) , Elastomer, TPE
Manufacturer Evonik Corporation
Trade Name Plexiglas®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Evonik Corporation Plexiglas® 99530 Crystal Clear Elastomer Based Film.pdf
  Online Service   lookpolymers   27660005
Material Notes:
Description: PLEXIGLAS® Film 99530, based on polymethyl methacrylate and polybutyl acrylate elastomers, is absolutely crystal-clear. This high-gloss film is suitable for universal application. It shows very good weather resistance in addition to impact strength and abrasion resistance, good resistance to weak acids and alkalis as well as nonpolar solvents. The film has no surface markings and can also be provided with one matte surface ("S" or "M" texture).Specific Notes for this Material: PLEXIGLAS® Film 99530 is used for nameplates, scales, dials, covers, data carriers, P-O-P displays and glazing. It is suitable for decorative and protective surface (Class A) of injection molded parts for the automotive, domestic appliances and telecommunications sectors.Information provided by degussa.
Physical Properties Metric English Comments
Density 1.15 g/cc
0.0415 lb/in³
ISO 1183
Mechanical Properties Metric English Comments
Film Tensile Strength at Yield, MD 50.0 MPa
7250 psi
no direction given; ISO 527
Film Elongation at Break, MD 30 %
30 %
no direction given; ISO 527
Film Elongation at Yield, MD 4.5 %
4.5 %
no direction given; ISO 527
Tensile Modulus 2.00 GPa
290 ksi
ISO 527
Thermal Properties Metric English Comments
CTE, linear 110 µm/m-°C

@Temperature 0.000 - 50.0 °C
61.1 µin/in-°F

@Temperature 32.0 - 122 °F
DIN 53752A
Specific Heat Capacity 1.50 J/g-°C
0.359 BTU/lb-°F
Vicat Softening Point 98.0 °C
208 °F
ISO 306, Method B 50
Optical Properties Metric English Comments
Refractive Index 1.49
ISO 489
Haze <= 1.5 %
<= 1.5 %
ASTM D1003
Yellow Index <= 1.0 %
<= 1.0 %
ASTM D1925
Transmission, Visible 92 %
92 %
DIN 5036
Electrical Properties Metric English Comments
Volume Resistivity >= 1.00e+13 ohm-cm
>= 1.00e+13 ohm-cm
No thickness given; IEC 250
Surface Resistance 1.00e+13 ohm
1.00e+13 ohm
IEC 250
Dissipation Factor 0.030

@Frequency 1e+6 Hz

@Frequency 1e+6 Hz
IEC 250

@Frequency 100 Hz

@Frequency 100 Hz
IEC 250
Descriptive Properties Value Comments
Pencil Hardness 1H-2H
ASTM D3363
Copyright © All Rights Reserved