- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, Unreinforced
- Ensinger Tecamid® 6/6 Nylon (PA66)
Ensinger Tecamid® 6/6 Nylon (PA66)
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Unreinforced |
| Manufacturer | Ensinger |
| Trade Name | Tecamid® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Ensinger Tecamid® 6/6 Nylon (PA66).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Type 6/6 is a general purpose standard grade nylon. Extruded in natural and black. (Weather Resistant Black Grade is also available.)Information provided by Ensinger, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.14 g/cc | 0.0412 lb/in³ | ASTM D792 |
| Water Absorption | 1.2 % | 1.2 % | at 24 hours; ASTM D570 |
| Water Absorption at Saturation | 8.5 % | 8.5 % | ASTM D570 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 90 | 90 | ASTM D785 |
| Tensile Strength, Yield | 80.0 MPa | 11600 psi | ASTM D638 |
| Elongation at Break | 25 % | 25 % | ASTM D638 |
| Tensile Modulus | 2.41 GPa | 350 ksi | ASTM D638 |
| Flexural Strength | 107 MPa | 15500 psi | ASTM D790 |
| Flexural Modulus | 3.03 GPa | 440 ksi | ASTM D790 |
| Compressive Strength | 34.5 MPa | 5000 psi | ASTM D695 |
| Izod Impact, Notched | 0.587 J/cm | 1.10 ft-lb/in | ASTM D256 |
| Coefficient of Friction, Dynamic | 0.26 | 0.26 | 40 psi, 50 fpm; ASTM D3702 |
| K (wear) Factor | 403 x 10-8 mm³/N-M | 200 x 10-10 in³-min/ft-lb-hr | 40 psi, 50 fpm; ASTM D3702 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 81.0 µm/m-°C @Temperature 20.0 °C |
45.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
| Specific Heat Capacity | 1.67 J/g-°C | 0.400 BTU/lb-°F | |
| Melting Point | 255 °C | 491 °F | ASTM D2133 |
| Maximum Service Temperature, Air | 85.0 °C | 185 °F | Long Term; ASTM UL746B |
| 149 °C | 300 °F | Intermittent | |
| Deflection Temperature at 0.46 MPa (66 psi) | 235 °C | 455 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 90.0 °C | 194 °F | ASTM D648 |
| Flammability, UL94 | V-2 @Thickness 3.00 mm |
V-2 @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.6 @Frequency 1e+6 Hz |
3.6 @Frequency 1e+6 Hz |
ASTM D150 |
| 4.0 @Frequency 60 Hz |
4.0 @Frequency 60 Hz |
ASTM D150 | |
| Dielectric Strength | 11.8 - 15.7 kV/mm | 300 - 400 kV/in | ASTM D149 |
| Dissipation Factor | 0.010 @Frequency 60 Hz |
0.010 @Frequency 60 Hz |
ASTM D150 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved