Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

EMS-Grivory Grivory® ELX 40 HNZ TPA

Category Polymer , Thermoplastic , Nylon , Nylon 6
Manufacturer EMS-Grivory (EMS-CHEMIE)
Trade Name Grivory®
Port Shanghai port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF EMS-Grivory Grivory® ELX 40 HNZ TPA.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Product description: Grilon ELX 40 H NZ is a high viscosity, heat stabilized, impact modified, thermoplastic PA6 elastomer for extrusion blow moulding applications. Grilon ELX 40 H NZ has the following important properties: High melt strengthImpact resistant even at low temperaturesEasy processingProcessable on conventional as well as on 3 D-machinesSuitable for sequential blow molding process in combination with flexible grades Grilon ELX 40 H NZ is used typically as flexible part in the sequential blow molding technology in combination with a rigid PA6 grade such as Grilon RVZ-15H.1 or Grilon R 50 H NZ. Application examples are air ducts for turbo-chargers and engine air ducts.Information provided by EMS Grivory
Physical Properties Metric English Comments
Density 1.03 g/cc
0.0372 lb/in³
ISO 1183
Water Absorption 6.5 %
6.5 %
ISO 62
Moisture Absorption 2.00 %
2.00 %
ISO 62
Linear Mold Shrinkage, Flow 0.0070 cm/cm
0.0070 in/in
ISO 294-4, 2577
Linear Mold Shrinkage, Transverse 0.0090 cm/cm
0.0090 in/in
ISO 294-4, 2577
Mechanical Properties Metric English Comments
Hardness, Shore D 50
50
conditioned, 15s; ISO 868
58
58
dry, 15s; ISO 868
Tensile Stress 16.0 MPa

@Strain 50.0 %
2320 psi

@Strain 50.0 %
conditioned; ISO 527-1/-2
21.0 MPa

@Strain 50.0 %
3050 psi

@Strain 50.0 %
dry; ISO 527-1/-2
Elongation at Break >= 50 %
>= 50 %
dry; ISO 527-1/-2
>= 50 %
>= 50 %
conditioned; ISO 527-1/-2
Tensile Modulus 0.250 GPa
36.3 ksi
conditioned; ISO 527-1/-2
0.550 GPa
79.8 ksi
dry; ISO 527-1/-2
Charpy Impact Unnotched NB
NB
dry; ISO 179/1eU
NB
NB
conditioned; ISO 179/1eU
NB

@Temperature 30.0 °C
NB

@Temperature 86.0 °F
dry; ISO 179/1eU
NB

@Temperature 30.0 °C
NB

@Temperature 86.0 °F
conditioned; ISO 179/1eU
Charpy Impact, Notched NB
NB
dry; ISO 179/1eA
NB
NB
conditioned; ISO 179/1eA
2.50 J/cm²

@Temperature 30.0 °C
11.9 ft-lb/in²

@Temperature 86.0 °F
dry; ISO 179/1eU
2.50 J/cm²

@Temperature 30.0 °C
11.9 ft-lb/in²

@Temperature 86.0 °F
conditioned; ISO 179/1eU
Thermal Properties Metric English Comments
CTE, linear, Parallel to Flow 160 µm/m-°C
88.9 µin/in-°F
ISO 11359-1/-2
CTE, linear, Transverse to Flow 170 µm/m-°C
94.4 µin/in-°F
ISO 11359-1/-2
Melting Point 210 °C
410 °F
10°C/min; ISO 11357-1/-3
Maximum Service Temperature, Air 100 - 120 °C
212 - 248 °F
long term; EMS
180 °C
356 °F
short term; EMS
Deflection Temperature at 0.46 MPa (66 psi) 60.0 °C
140 °F
ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi) 45.0 °C
113 °F
ISO 75-1/-2
Flammability, UL94 HB
HB
IEC 60695-11-10
Electrical Properties Metric English Comments
Volume Resistivity 1.00e+10 ohm-cm
1.00e+10 ohm-cm
conditioned; IEC 60093
1.00e+11 ohm-cm
1.00e+11 ohm-cm
dry; IEC 60093
Surface Resistance 1.00e+10 ohm
1.00e+10 ohm
IEC 60093
Dielectric Strength 26.0 kV/mm
660 kV/in
conditioned; IEC 60243-1
28.0 kV/mm
711 kV/in
dry; IEC 60243-1
Comparative Tracking Index 600 V
600 V
conditioned; IEC 60112
Descriptive Properties Value Comments
Automotive Air intake sytems
Cooling and climate control
Electricals & Electronics Cables & Tubes
Form Granules
Industry & Consumer goods Hydraulics & Pneumatics
Processing Extrusion - blow molding
Other Extrusion
Special Characteristics High impact or impact modified
Improved heat resistance
Copyright © lookpolymers.com All Rights Reserved