DuPont Performance Polymers Zytel® ST801 NC010A Nylon 66 (Unverified Data**)

Category	Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Impact Grade
Manufacturer	DuPont Performance Polymers
Trade Name	Zytel®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Zytel® ST801 NC010A Nylon 66 (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Super Toughened Polyamide 6 Zytel ST801 is an unreinforced super tough polyamide 66 for injection molding and extrusion. It offers outstanding break resistance over a wide temperature and humidity range and high productivity.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	1.08 g/cc	0.0390 lb/in³	DAM; ISO 1183
Water Absorption	6.7 % @Thickness 2.00 mm	6.7 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Moisture Absorption	2.20 % @Thickness 2.00 mm	2.20 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Linear Mold Shrinkage, Flow	0.017 cm/cm	0.017 in/in	DAM; ISO 294-4 2577

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	43.0 MPa	6240 psi	50%RH; ISO 527-1/-2
	50.0 MPa	7250 psi	DAM; ISO 527-1/-2
Elongation at Break	32 %	32 %	DAM; Nominal; ISO 527-1/-2
	>= 50 %	>= 50 %	50%RH; Nominal; ISO 527-1/-2
Elongation at Yield	5.7 %	5.7 %	DAM; ISO 527-1/-2
	37 %	37 %	50%RH; ISO 527-1/-2
Tensile Modulus	0.900 GPa	131 ksi	50%RH; ISO 527-1/-2
	2.00 GPa	290 ksi	DAM; ISO 527-1/-2
Shear Modulus	0.0822 GPa @Temperature 150 °C	11.9 ksi @Temperature 302 °F	DAM; Dynamic; ISO 11403-1 -2
	0.1075 GPa @Temperature 110 °C	15.59 ksi @Temperature 230 °F	DAM; Dynamic; ISO 11403-1 -2
	0.2994 GPa @Temperature 60.0 °C	43.42 ksi @Temperature 140 °F	DAM; Dynamic; ISO 11403-1 -2
	0.6815 GPa @Temperature 10.0 °C	98.84 ksi @Temperature 50.0 °F	DAM; Dynamic; ISO 11403-1 -2
	0.7189 GPa @Temperature -20.0 °C	104.3 ksi @Temperature -4.00 °F	DAM; Dynamic; ISO 11403-1 -2
	0.9346 GPa @Temperature -50.0 °C	135.6 ksi @Temperature -58.0 °F	DAM; Dynamic; ISO 11403-1 -2
Charpy Impact Unnotched	NB	NB	DAM; ISO 179/1eU
	NB	NB	50%RH; ISO 179/1eU
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	DAM; ISO 179/1eU
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	50%RH; ISO 179/1eU
Charpy Impact, Notched	8.00 J/cm²	38.1 ft-lb/in²	DAM; ISO 179/1eA
	11.5 J/cm²	54.7 ft-lb/in²	50%RH; ISO 179/1eA
	1.70 J/cm² @Temperature -30.0 °C	8.09 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 179/1eA
	1.80 J/cm² @Temperature -30.0 °C	8.57 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eA
Tensile Creep Modulus, 1 hour	1200 MPa @Time 3600 sec	174000 psi @Time 1.00 hour	50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours	750 MPa @Time 3.60e+6 sec	109000 psi @Time 1000 hour	50%RH; ISO 899-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	120 µm/m-°C	66.7 µin/in-°F	DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow	90.0 µm/m-°C	50.0 µin/in-°F	DAM; ISO 11359-1/-2
Melting Point	263 °C	505 °F	DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	132 °C	270 °F	DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	64.0 °C	147 °F	DAM; ISO 75-1/-2
Glass Transition Temp, Tg	75.0 °C	167 °F	DAM; 10°C/min; ISO 11357-1/-2
Flammability, UL94	HB @Thickness 1.50 mm	HB @Thickness 0.0591 in	DAM; IEC 60695-11-10
	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in	DAM; IEC 60695-11-10
Flame Spread	26 mm/min @Thickness 1.00 mm	1.0 in/min @Thickness 0.0394 in	ISO 3795 (FMVSS 302)
Oxygen Index	20 %	20 %	DAM; ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+13 ohm-cm	1.00e+13 ohm-cm	50%RH; IEC 60093
	1.00e+15 ohm-cm	1.00e+15 ohm-cm	DAM; IEC 60093
Surface Resistance	>= 1.00e+15 ohm	>= 1.00e+15 ohm	50%RH; IEC 60093
Dielectric Constant	2.9 @Frequency 1.00e+6 Hz	2.9 @Frequency 1.00e+6 Hz	DAM; IEC 60250
	3.2 @Frequency 100 Hz	3.2 @Frequency 100 Hz	DAM; IEC 60250
	3.6 @Frequency 1.00e+6 Hz	3.6 @Frequency 1.00e+6 Hz	50%RH; IEC 60250
	8.0 @Frequency 100 Hz	8.0 @Frequency 100 Hz	50%RH; IEC 60250
Dielectric Strength	31.0 kV/mm	787 kV/in	DAM; IEC 60243-1
	39.0 kV/mm	991 kV/in	50%RH; IEC 60243-1
Dissipation Factor	0.0080 @Frequency 100 Hz	0.0080 @Frequency 100 Hz	DAM; IEC 60250
	0.014 @Frequency 1.00e+6 Hz	0.014 @Frequency 1.00e+6 Hz	DAM; IEC 60250
	0.055 @Frequency 1.00e+6 Hz	0.055 @Frequency 1.00e+6 Hz	50%RH; IEC 60250
	0.18 @Frequency 100 Hz	0.18 @Frequency 100 Hz	50%RH; IEC 60250
Comparative Tracking Index	600 V	600 V	DAM; IEC 60112

Descriptive Properties	Value	Comments
Emission of organic compounds	38.4 µgC/g	VDA 277
Odour	class 3	VDA 270
Part Marking Code	>PA66-HI<	ISO 11469
Processing	Injection Moulding
	Other Extrusion
Regional Availability	Europe
	Near East/Africa
Resin Identification	PA66-HI

Users viewing this material also viewed the following: