DuPont Performance Polymers Zytel® FG101L NC010 Nylon 66 (Unverified Data**)

Category	Polymer , Thermoplastic , Nylon , Nylon 66
Manufacturer	DuPont Performance Polymers
Trade Name	Zytel®
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	DuPont Performance Polymers Zytel® FG101L NC010 Nylon 66 (Unverified Data**).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Unreinforced Polyamide 66 with Developed for Food Contact ApplicationsZytel FG101L NC010 is a lubricated polyamide 66 resin for injection molding. It has been developed for consideration into applications such as parts for the food industry.Information provided by DuPont Performance Polymers

Physical Properties	Metric	English	Comments
Density	0.970 g/cc	0.0350 lb/in³
	1.14 g/cc	0.0412 lb/in³	DAM; ISO 1183
Water Absorption	8.5 % @Thickness 2.00 mm	8.5 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Moisture Absorption	2.60 % @Thickness 2.00 mm	2.60 % @Thickness 0.0787 in	DAM; Sim. to ISO 62
Viscosity Test	150 cm³/g	150 cm³/g	DAM; ISO 307 1157 1628
Linear Mold Shrinkage, Flow	0.014 cm/cm	0.014 in/in	DAM; ISO 294-4 2577
Linear Mold Shrinkage, Transverse	0.014 cm/cm	0.014 in/in	DAM; ISO 294-4 2577

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell M	59	59	50%RH; ISO 2039-2
	79	79	DAM; ISO 2039-2
Hardness, Rockwell R	108	108	50%RH; ISO 2039-2
	121	121	DAM; ISO 2039-2
Tensile Strength, Yield	55.0 MPa	7980 psi	50%RH; ISO 527-1/-2
	82.0 MPa	11900 psi	DAM; ISO 527-1/-2
Elongation at Break	25 %	25 %	DAM; Nominal; ISO 527-1/-2
	>= 50 %	>= 50 %	50%RH; Nominal; ISO 527-1/-2
Elongation at Yield	4.5 %	4.5 %	DAM; ISO 527-1/-2
	4.5 %	4.5 %	DAM; ISO 527-3
	25 %	25 %	50%RH; ISO 527-1/-2
Tensile Modulus	1.40 GPa	203 ksi	50%RH; ISO 527-1/-2
	3.10 GPa	450 ksi	DAM; ISO 527-1/-2
Flexural Modulus	1.20 GPa	174 ksi	50%RH; ISO 178
	2.80 GPa	406 ksi	DAM; ISO 178
Charpy Impact Unnotched	NB	NB	DAM; ISO 179/1eU
	NB	NB	50%RH; ISO 179/1eU
	40.0 J/cm² @Temperature -30.0 °C	190 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eU
	NB @Temperature -30.0 °C	NB @Temperature -22.0 °F	50%RH; ISO 179/1eU
Charpy Impact, Notched	0.550 J/cm²	2.62 ft-lb/in²	DAM; ISO 179/1eA
	1.50 J/cm²	7.14 ft-lb/in²	50%RH; ISO 179/1eA
	0.300 J/cm² @Temperature -30.0 °C	1.43 ft-lb/in² @Temperature -22.0 °F	50%RH; ISO 179/1eA
	0.450 J/cm² @Temperature -30.0 °C	2.14 ft-lb/in² @Temperature -22.0 °F	DAM; ISO 179/1eA
Tensile Creep Modulus, 1 hour	1400 MPa @Time 3600 sec	203000 psi @Time 1.00 hour	50%RH; ISO 899-1
Tensile Creep Modulus, 1000 hours	820 MPa @Time 3.60e+6 sec	119000 psi @Time 1000 hour	50%RH; ISO 899-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	100 µm/m-°C	55.6 µin/in-°F	DAM; ISO 11359-1/-2
CTE, linear, Transverse to Flow	110 µm/m-°C	61.1 µin/in-°F	DAM; ISO 11359-1/-2
Specific Heat Capacity	2.79 J/g-°C	0.667 BTU/lb-°F
Thermal Conductivity	0.160 W/m-K	1.11 BTU-in/hr-ft²-°F	of melt
Melting Point	262 °C	504 °F	DAM; 10°C/min; ISO 11357-1/-3
Deflection Temperature at 0.46 MPa (66 psi)	200 °C	392 °F	DAM; ISO 75-1/-2
Deflection Temperature at 1.8 MPa (264 psi)	70.0 °C	158 °F	DAM; ISO 75-1/-2
Vicat Softening Point	240 °C	464 °F	DAM; 50°C/h 50N; ISO 306
Glass Transition Temp, Tg	60.0 °C	140 °F	DAM; 10°C/min; ISO 11357-1/-2
Flammability, UL94	V-2 @Thickness 1.50 mm	V-2 @Thickness 0.0591 in	DAM; IEC 60695-11-10
	V-2 @Thickness 0.700 mm	V-2 @Thickness 0.0276 in	DAM; IEC 60695-11-10
Oxygen Index	28 %	28 %	DAM; ISO 4589-1/-2

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.00e+12 ohm-cm	1.00e+12 ohm-cm	50%RH; IEC 60093
	1.00e+14 ohm-cm	1.00e+14 ohm-cm	DAM; IEC 60093
Surface Resistance	1.00e+12 ohm	1.00e+12 ohm	50%RH; IEC 60093
Dielectric Constant	3.5 @Frequency 1.00e+6 Hz	3.5 @Frequency 1.00e+6 Hz	DAM; IEC 60250
	3.8 @Frequency 100 Hz	3.8 @Frequency 100 Hz	DAM; IEC 60250
	4.0 @Frequency 1.00e+6 Hz	4.0 @Frequency 1.00e+6 Hz	50%RH; IEC 60250
	6.0 @Frequency 100 Hz	6.0 @Frequency 100 Hz	50%RH; IEC 60250
Dielectric Strength	28.0 kV/mm	711 kV/in	50%RH; IEC 60243-1
	32.0 kV/mm	813 kV/in	DAM; IEC 60243-1
Dissipation Factor	0.0080 @Frequency 100 Hz	0.0080 @Frequency 100 Hz	DAM; IEC 60250
	0.018 @Frequency 1.00e+6 Hz	0.018 @Frequency 1.00e+6 Hz	DAM; IEC 60250
	0.075 @Frequency 1.00e+6 Hz	0.075 @Frequency 1.00e+6 Hz	50%RH; IEC 60250
	0.21 @Frequency 100 Hz	0.21 @Frequency 100 Hz	50%RH; IEC 60250
Comparative Tracking Index	600 V	600 V	DAM; IEC 60112

Descriptive Properties	Value	Comments
Additives	Release agent
Delivery Form	Pellets
Eff. thermal diffusivity	5.00E-08 m²/s
Part Marking Code	>PA66<	ISO 11469
Processing	Injection Moulding
Regional Availability	Asia Pacific
	Europe
	Global
	Near East/Africa
	North America
	South and Central America
Resin Identification	PA66
UL recognition	UL	DAM

Users viewing this material also viewed the following: